System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change internal disk in 9000/800/A400-44

SOLVED
Go to solution
Carme Torca
Super Advisor

How to change internal disk in 9000/800/A400-44

Hi,

I would known if its necessary to stop the server to change one internal disk.

Thanks a lot of!
Carmen.
Users are not too bad ;-)
2 REPLIES
Vivek_Pendse
Valued Contributor
Solution

Re: How to change internal disk in 9000/800/A400-44

The disk drives (up to two) are located at the front left side of the server (as you are facing it). When proper
software and hardware procedures are followed, these disk drives can be removed and replaced while the
server is running.

Thanks,
Vivek
Torsten.
Acclaimed Contributor

Re: How to change internal disk in 9000/800/A400-44

The drives are hotplug, so using a "normal" LVM replacement procedure you can replace the drive online. Just pull the front cover and open the "door". The H/W path is written on the chassis.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!