HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

How to decomission a virtual partition in hpunix

 
SOLVED
Go to solution
sanwin
Frequent Advisor

How to decomission a virtual partition in hpunix

Hi,

We are trying to decommission a virtual partition in rx8640 model. After decommissioning we have to present the processor and memory to other partitions.

Could anyone can guide me. I am new to this concept of virtual partition.


The version of vpar is A.04.03.03


Please help me.

Thanks!!

Regards,
Sanwin
4 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: How to decomission a virtual partition in hpunix

From the manual:

Managing: Removing a Virtual Partition
To remove a virtual partition, use vparremove. vparremove purges the virtual partition from
the vPars database. Any resources dedicated to the virtual partition are now free to allocate to
a different virtual partition (for A.03, see Appendix B for exceptions).
You need to shutdown the virtual partition before attempting removal. If the target virtual
partition is running, vparremove will fail.
...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
sanwin
Frequent Advisor

Re: How to decomission a virtual partition in hpunix

Thanks for the reply. Can anyone else help me regarding this.

Thanks!!
Regards,
Sanwin
Torsten.
Acclaimed Contributor

Re: How to decomission a virtual partition in hpunix

>> Can anyone else help me regarding this


What is the problem?

Doesn't vparremove remove the vpar?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to decomission a virtual partition in hpunix

Do you have problems to add the resources?

Please post your current config by

# vparstatus

# vparstatus -A

# vparstatus -v

and specify where you want to add the resources.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!