HPE Community
Operating System - HP-UX
1753731 Members
4565 Online
108799 Solutions
New Discussion юеВ

How to dismount SCSI devices?

 
B. Jen
Contributor

тАО05-26-2009 09:09 AM

тАО05-26-2009 09:09 AM

How to dismount SCSI devices?

We are re-arranging the SCSI devices and need to unplug the SCSI cable from the back of the server. Do we have to "dismount" all the SCSI devices first? Can we disconnect the SCSI cable without shutting the server?

Thank you in advacned for answers.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-26-2009 09:32 AM

тАО05-26-2009 09:32 AM

Re: How to dismount SCSI devices?

Never open an active SCSI bus - oherwise you can damage your system or loose data.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Heironimus
Honored Contributor

тАО05-26-2009 09:41 AM

тАО05-26-2009 09:41 AM

Re: How to dismount SCSI devices?

Unless you have a hot-plug connector (most external ports are NOT hot-pluggable) you should really power down the devices on both ends of a SCSI cable before disconnecting it.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.