HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

How to install manually a special file for a device

 
SOLVED
Go to solution
GNOM
Frequent Advisor

How to install manually a special file for a device

Hi,

My question is if it's possible to create manualy a special file for a device. Exple : for the disk in path 0/4/0/0.1.0 with instance 3 create the special fife /dev/dsk/C4t1dO ?

Regards
8 REPLIES
Mark McDonald_2
Trusted Contributor

Re: How to install manually a special file for a device

does it show up in ioscan without the device file?

try insf -H 0/4/0/0.1.0

try man insf for other options
點燃
Valued Contributor

Re: How to install manually a special file for a device

Hi,
First remove the device file at that path

#rmsf -H 0/4/0/0.1.0

Now run ioscan -fnC disk, you can see the disk shows claimed if it's physical connection is good.

Then execute,

#insf -H 0/4/0/0.1.0

All the device files will be created after this.

Hope this helps!
Pradeesh Kumar P
Man's mind, once stretched by a new idea, never regains its original dimensions
GNOM
Frequent Advisor

Re: How to install manually a special file for a device

the files are created succeffully but my probleme is that the file name doesn't much my need. So I have to give a specific name to the device so that I could joint the cluster.

Regards
Jozef_Novak
Respected Contributor

Re: How to install manually a special file for a device

Hello,

you can try to set up symbolic links with the name of your choice, pointing to the default files.

J.
Mark McDonald_2
Trusted Contributor
Solution

Re: How to install manually a special file for a device

you can use mv to rename the files.
GNOM
Frequent Advisor

Re: How to install manually a special file for a device

thanks all for your replies.

I used mv to rename files. All is ok now.

regards
GNOM
Frequent Advisor

Re: How to install manually a special file for a device

thanks all for your replies.

I used mv to rename files. All is ok now.

regards
Eduardo Crespo
Occasional Contributor

Re: How to install manually a special file for a device

Hi try to use

#insf -e

its command recreate all the special files in the system.

use #man insf for more options.

good luck
regards