How to login MP in HP-UX

[Muhammad Farhan Nasir]

How to MP login in HP-UX OS console. i am not in the same City where the server.
I am able to do SSH.

Thanks
Muhammad Farhan Nasir

[R.K. #]

Hi Farhan,

>>I am able to do SSH

MP or GSP has a different IP from a normal IP. You must be having normal IP of the server. Multiple users can do ssh/telnet from normal IP, but from MP only one user can log in.

So, you need to ask for the IP of MP and its login credentials to log in.

[BUPA IS]

Hello,
In general telnet or ssh to the ip address of the ilom MP card and logon with Admin and the password. Some models will only do ssh if it has been enabled before hand. Some models also have a web interface put the ip address of the ilo card in the browser.
Type HE for help which will decscribe the commands available to you on your particular system and firmware release subsequent menus also have a help command .
I hope this is of some help
Mike

[Muhammad Farhan Nasir]

Problem is that server show amber light on On error LED, but server is working now, i want to read/clear the logs.
i have only server IP address.

can you help me in this regards

Thanks
Muhammad Farhan

[R.K. #]

I do not *think* there is any way to find the console/MP ip in 11.11. (Moreover, you are in remote location).

You have to contact someone who can provide MP details.

[R.K. #]

Which logs are you specifically looking for?

[Muhammad Farhan Nasir]

i want ot read/clear MP event logs, after this amber LED is Off?

[BUPA IS]

hello,
The MP card uses a seperate physical interface for security and OS integrity reasons. Without the ip address of the MP /ilo card a remote connection is not possible unless a remote modem has been installed in which case you need the phone number.
You will need to get somebody local to the machine to sign on and give you the MP ip address or even get them to access the system log (SL) to read and clear the alert .

good luck
Mike

[Hakki Aydin Ucar]

Hi

MP is a good remote console utility. I used telnet to logon MP, just put ;IP and walk in the menu.

For commands go to page:
http://www.docs.hp.com/en/5185-4391/ch03s06.html

[Torsten.]

On some models you can get the MP IP from SMH - try it.