Thanks for Mr TTr, Favez Zalloum, Torsten, Ahsan your help
Error writing VGDA [1] to disk H/W path 0/0/1/1.0.0 (error = 5)
What happens next? Or does it stop here? What disk is the 0/0/1/1.0.0? Your only boot disk, a boot mirror or a non-boot disk?
I ahve try to boot on un other disk and i can access to files in single user
------------------ -----------
P0 0/0/1/0.0 extscsi.0 Sequential access media
P1 0/0/1/1.2 intscsib.2 Random access media
P2 0/0/1/1.0 intscsib.0 Random access media
P3 0/0/2/0.2 intscsia.2 Random access media
P4 0/0/2/0.0 intscsia.0 Random access media
P5 0/0/2/1.2 media.2 Random access media
First I boot on P0 and then i boot on P1.
I don't understand there is only 4 disks on my server. What is the difference between P0 and P1 ?
Can your system continue normally, if so?
What is the output of?
#ioscan -funC disk
ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
disk 2 0/0/1/1.0.0 sdisk CLAIMED DEVICE HP 36.4GMAN3367MC
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
disk 0 0/0/1/1.2.0 sdisk CLAIMED DEVICE HP 36.4GST336706LC
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 3 0/0/2/0.0.0 sdisk CLAIMED DEVICE HP 36.4GMAN3367MC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
disk 4 0/0/2/0.2.0 sdisk CLAIMED DEVICE HP 36.4GMAN3367MC
/dev/dsk/c2t2d0 /dev/rdsk/c2t2d0
disk 1 0/0/2/1.2.0 sdisk CLAIMED DEVICE HP DVD-ROM 305
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
At first the system says continually error on HD.
After I boot on P1 I can access to the files.
Don't know enough details yet, but did you try to add the cdrom to a vg by chance?
How can can I add CDROM in a vg ?
>>lvlnboot: Warning: couldn't query physical volume "/dev/dsk/c1t0d0":
The specified path does not correspond to physical volume attached to
this volume group
lvlnboot: Warning: couldn't query all of the physical volumes.
guess that, your boot disk is failed. Try to boot with other disk.
then watch what is happening.
Yes I boot on P1
These are the messages when I booting on P1.
What I have now to repare my disk ?
Boot
: disk(0/0/1/1.2.0.0.0.0.0;0)/stand/vmunix
6778880 + 1019824 + 855176 start 0x21aee8
alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7f9ab000.
WARNING: Kernel symbol table verification failed
gate64: sysvec_vaddr = 0xc0002000 for 1 pages
NOTICE: autofs_link(): File system was registered at index 3.
NOTICE: nfs3_link(): File system was registered at index 5.
System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 2097152
Starting the STREAMS daemons-phase 1
Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files
B2352B/9245XB HP-UX (B.11.00) #1: Wed Nov 5 22:38:19 PST 1997
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 2097152 Kbytes, lockable: 1575908 Kbytes, available: 1816476 Kbytes
/sbin/ioinitrc:
/dev/vg00/lvol1: 1 BLK(S) MISSING
/dev/vg00/lvol1: BAD CYLINDER GROUPS (FIXED)
/dev/vg00/lvol1: 78 files, 0 icont, 7326 used, 30040 free (96 frags, 3743 blocks)
lvlnboot: Warning: couldn't query physical volume "/dev/dsk/c1t0d0":
The specified path does not correspond to physical volume attached to
this volume group
lvlnboot: Warning: couldn't query all of the physical volumes.
INIT: Overriding default level with level 'S'
INIT: SINGLE USER MODE
Thanks.
Main Menu: Enter command or menu > bo P1
Interact with IPL (Y, N, or Cancel)?> y
Booting...
Boot IO Dependent Code (IODC) revision 1
