cancel
Showing results for 
Search instead for 
Did you mean: 

How to see MP from HP-UX OS

SOLVED
Go to solution
shashi kanth
Super Advisor

How to see MP from HP-UX OS

From HP-UX os, how we can see it's console configuration, like it's MP IP address, hardware status, etc... ?
7 REPLIES
Dennis Handly
Acclaimed Contributor
Solution

Re: How to see MP from HP-UX OS

You can't. The MP is a completely separate computer.
The most you could do is:
stty +resetGSP http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1227867
shashi kanth
Super Advisor

Re: How to see MP from HP-UX OS

OK.

Looks like SUN is better here, i can modify/view console parameters from the Solaris OS itself.

Torsten.
Acclaimed Contributor

Re: How to see MP from HP-UX OS

Well, it depends (as always).

In some configurations (model+OS) the SMH is using a special script to get the IP address.

This means, it is working on some models.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: How to see MP from HP-UX OS

see also

http://forums.itrc.hp.com/service/forums/questionanswer.do?&threadId=1216594

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
YAQUB_1
Respected Contributor

Re: How to see MP from HP-UX OS

Hi,

Loging MP LAN, then execute the below commands:-
>>> MP IP address

MP>cm
MP:CM>ls --------> lan status

>>> U did not menson which HP-UX box Ur using (Cellboard based)?

MP:CM>sysrev --------> system firmware version

MP:CM>pe ---------> system power option (Cellboard based)

MP:CM>pc ----------> system power option (non cellboard based)

MP:CM>cp ---------> Cabinet Parts
MP:CM>ps ---------> power status

U can also check the below thread:-
http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1225842

BR/
Yaqub
shashi kanth
Super Advisor

Re: How to see MP from HP-UX OS

I got the answer, closing this thread.
Shinji Teragaito_1
Respected Contributor

Re: How to see MP from HP-UX OS

Additional info.

What I mentioned above would be applicable on the environment
with SFM B.04.00.06.yy (11.23)/C.02.00.04.yy (11.31) or later.
Such enviroment has MP Instance Provider included in the
SFMProviderModule.

Shinji