Howto get CPU frequency information on HP-UX ?

[Geoff Wild]

Yes, the command is:

/usr/contrib/bin/machinfo

adb won't work on Itanium.

Rgds...Geoff

[MAUCCI_2]

Hi

the CLI that runs on IPF is
echo "itick_per_usec/D" | adb -o /stand/vmunix /dev/kmem

-Cyrille

[Raj D.]

Voran,
Good day!!

If you have access to SAM , you can do the following:

sam--> Performance Monitor --> System Property .

----------------------------------------
Ex:
Processors:
Active: 2
Total: 2
CPU Version: 2.0 PA8500
Clock Frequency: 440 MHz
Machine Identification: 534760508
Hardware Model: 9000/800/A500-44
Kernel Width Support: 64
-------------------------------------------

And you will see the CPU frequency Information with other informations.


Cheers,
Raj.

[BOUVET_2]

Thanks all but it's ok now.

Yes, of course, i can use SAM, but I need to get this informations from scripts.

MAUCI, You send solution that already done ... please read before ;-)

It 's ok, I have my solution for HP IA64 and HP9000

THANKS ALL :)

[BOUVET_2]

thx

[MAUCCI_2]

Hmmm, I don't understand what
"You send solution that already done ... please read before ;-)
"
means,

but if you look carefully, my adb command is unique (look at -o) in this post and it is what make its work on IA systems...

unlike other proposed for which you were complaining about them not working on IA
;-)

Cheers
Cyrille

[BOUVET_2]

Hi Cyrille,

Accept my apologises, you totally right.
Your command run also on IA64

Thanks

Philippe

[Raj D.]

Voran,

One thing to be noted :

Giving 0 pts to my last post shows you are sick., and you need to check out this page:

http://66.34.90.71/ITRCForumsEtiquette/




"
Subject: Howto get CPU frequency information on HP-UX ?

Though, You never mentioned through command prompt.



Hope this will help,
Regards,
Raj.

[BOUVET_2]

Raj,

I can understand that 0 pts frustate you.
But,

You fisrt give solution for HP9000 after I ask solution for IA64. And your solution was the same that as done before.

Then you give "very light" solution (yes, use sam is not fair, are you thinking we are poor noob? ) after I said it's ok I have solution.

May be I'm sick like you said (thanks a lot) but may be you only search to win points. I don't think that can improve the quality of this forum. An dthat can be add in the ITRCForumsEtiquette/

Regards
Philippe

[Raj D.]

Voran,

Looks like still you havn't gone through the link: http://66.34.90.71/ITRCForumEtiquette/

, else It could have very easy to understand as how this forum works. I suggest, take out sometime to go through the link. Nothing more I have to write,

This forum is nice and alwayas will be nice,


Cheers,
Raj.