System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

I need to view hba driver version in tru64 4.0 and 5.0

SOLVED
Go to solution

I need to view hba driver version in tru64 4.0 and 5.0

Hi,
I don't know how to view the hba driver version. I tried with emxmgr menu, hwmgr command and i haven't seen this.
I don't have the initialize hba lines in /var/adm/messages file because the system have a long time up.
Thank's in advance.
Jesús Higueras.
3 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: I need to view hba driver version in tru64 4.0 and 5.0

Hi,

If you can't get the details from /var/adm/messages then you may have look at your SAN switches.

Have a look at the output of the command nsShow, assuming you're using Brocade based switches...

Hope this helps,

Regards,

Rob

Re: I need to view hba driver version in tru64 4.0 and 5.0

Rob,

I have got to see the driver and firmware version correctly with the nsshow command from de switch.

Thank you for all

Jesús.
DCBrown
Frequent Advisor

Re: I need to view hba driver version in tru64 4.0 and 5.0

If you are just interested in the emx driver version, then a low tech way is:

# strings /vmunix | grep emx | grep driver
emx driver rev 2.25