System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based ...

 
tazhasan
Occasional Advisor

IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based ...

Hi

I have an igniote script:

#!/usr/bin/sh

#### A short script to create Ignite images and keep a log
HOST=$(hostname)
IGN_SERVER=hatux5b
LOGDIR=/var/adm/TVW
LOGFILE=tape.ignite.log
TAPEDEV=/dev/rmt/0m
TAPEDEVN=${TAPEDEV}n # no rewind dev
IMAGES=1


##### Make a directory for logs
if [ ! -d ${LOGDIR} ]
then
mkdir ${LOGDIR}
fi

##### Keep Last Logfile
if [ -f ${LOGDIR}/${LOGFILE} ]
then
mv ${LOGDIR}/${LOGFILE} ${LOGDIR}/${LOGFILE}.old
fi

# spool output to logfile
exec > ${LOGDIR}/${LOGFILE} 2>&1

echo "Making Ignite for $HOST : $(date)"
/opt/ignite/bin/make_tape_recovery -a ${TAPEDEVN} -I -v -x inc_entire=vg00 -x exclude=/var/adm/crash -x exclude=/var/opt/perf -x exclude=/opt/ignite -x exclude=/dataprotector_dump

RC=$?
if [ ${RC} = 0 ]
then
/usr/bin/mt -f ${TAPEDEV} rew
echo "Finished: Return code=${RC}"
else
echo "WARNING !!! Ignite make_tape_recovery - Finished: Return code=${RC}"
fi

And it is hanging at the message:

+ /opt/ignite/bin/make_tape_recovery -a /dev/rmt/0mn -I -v -x inc_entire=vg00 -x exclude=/var/adm/crash -x exclude=/var/opt/perf -x exclude=/opt/ignite -x exclude=/dataprotector_dump

** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive

* Scanning system for IO devices...
* Boot device is: 0/1/1/0.0xbccea3c04061bb.0x0
WARNING: The volume group /dev/vg00 will be only partially included in the System Recovery Archive. This means that not all files and directories on this
volume group will be restored when the archive is installed. This message can be suppressed using the "-P s" option for make_tape_recovery. See
make_tape_recovery(1M) for more details.

WARNING: You are about to create an Itanium-based recovery tape. If this system does NOT support direct tape boot, you will need to perform "two-step media
recovery" where the boot media (CD or DVD) has the same version of Ignite-UX as the version on this tape.

I use to use a DDS3 but it didn't have enough capacity so would fail becuase there was no one to enter a 2nd tape.  I have now put in a brand new DDS4 dat72, and am getting thiese messages above?

Any ideas:

Regards

Tariq

 

 

6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

Warnings are normal because of your excludes. Does it finish?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tazhasan
Occasional Advisor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

Hi Torsten

I hit ctrl-c after about an hour, and as soon as I did, the log read:

ERROR: The make_sys_image command failed. The system recovery archive will not be created.
* Creating local directories for configuration files and archive.

======= 08/30/19 11:13:01 BST Started /opt/ignite/bin/make_tape_recovery. (Fri Aug 30 11:13:01 BST 2019)
@(#)Ignite-UX Revision C.7.17.391
@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1311/ignite/src@86032 Last Modified: 2013-11-11 10:36:33 +0530 (Mon, 11 Nov 2013)

* Recovery Archive Description = Recovery Archive

* Recovery Archive Location = /dev/rmt/0mn

* Number of Archives to Save = 2

* Pax type = tar


In? dsk/vg name minor# Associated disks/mountpoints
1 v /dev/vg00 0x00 /dev/disk/disk2_p2
/dev/vg00/lvol1 /stand 2
/dev/vg00/lvol2
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /tmp 2
/dev/vg00/lvol5 /var/opt/perf 0
/dev/vg00/lvol6 /home 2
/dev/vg00/lvol7 /opt 2
/dev/vg00/lvol8 /usr 2
/dev/vg00/lvol9 /var 2
/dev/vg00/lvol10 /var/adm/crash 0
/dev/vg00/lv_ignite /opt/ignite 0
0 v /dev/vgomnishared 0x71 /dev/disk/disk21
/dev/vgomnishared/lvol1 /var/opt/omni 0
/dev/vgomnishared/etc_omni /etc/opt/omni 0
0 v /dev/vgTVWCAT11g 0x70 /dev/disk/disk26 /dev/disk/disk27 /dev/disk/disk25
/dev/vgTVWCAT11g/lvol2 /dataprotector_dump 0
/dev/vgTVWCAT11g/audit /var/.audit 0
/dev/vgTVWCAT11g/tvwcat /u02/oradata/TVWCAT 0
/dev/vgTVWCAT11g/u01 /u01 0
/dev/vgTVWCAT11g/oms10g /u01/app/oracle/oms10g 0
/dev/vgTVWCAT11g/lvol7
0 v /dev/vgignite 0x02 /dev/disk/disk19
/dev/vgignite/lvol1 /var/opt/ignite 0
0 v /dev/vgomnitmp 0x05 /dev/disk/disk44
/dev/vgomnitmp/lv_omnitmp
0 v /dev/vgtallycat 0x66 /dev/disk/disk57
/dev/vgtallycat/lvol1 /u01/app/TALLYPROD/backup 0
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2019-08-30,11:13/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Backing Up Volume Group /dev/vgomnishared
* /usr/sbin/vgcfgbackup /dev/vgomnishared
* Creating Map Files for Volume Group /dev/vgomnishared
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgomnishared.mapfile /dev/vgomnishared

* Backing Up Volume Group /dev/vgTVWCAT11g
* /usr/sbin/vgcfgbackup /dev/vgTVWCAT11g
* Creating Map Files for Volume Group /dev/vgTVWCAT11g
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgTVWCAT11g.mapfile /dev/vgTVWCAT11g

* Backing Up Volume Group /dev/vgignite
* /usr/sbin/vgcfgbackup /dev/vgignite
* Creating Map Files for Volume Group /dev/vgignite
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgignite.mapfile /dev/vgignite

* Backing Up Volume Group /dev/vgomnitmp
* /usr/sbin/vgcfgbackup /dev/vgomnitmp
* Creating Map Files for Volume Group /dev/vgomnitmp
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgomnitmp.mapfile /dev/vgomnitmp

* Backing Up Volume Group /dev/vgtallycat
* /usr/sbin/vgcfgbackup /dev/vgtallycat
* Creating Map Files for Volume Group /dev/vgtallycat
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgtallycat.mapfile /dev/vgtallycat

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2019-08-30,11:13/archive_cfg -g /var/opt/ignite/recovery/2019-08-30,11:13/flist -n
2019-08-30,11:13 -r ipf -b 64 -d Recovery\ Archive -t 22 -i 1 -m t
* Saving the information about archive to /var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
NOTE: File: /var/tmp/tmp_cfg_file is not world-readable, this may cause clients to fail to read it during an installation.
NOTE: File: /var/opt/ignite/tmp/20808/cfg is not world-readable, this may cause clients to fail to read it during an installation.
NOTE: File: /var/opt/ignite/tmp/20808/IINSTALLFS is not world-readable, this may cause clients to fail to read it during an installation.
* Complete writing boot LIF onto tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s local -n 2019-08-30,11:13 -m t -w
/var/opt/ignite/recovery/2019-08-30,11:13/recovery.log -u -R -g /var/opt/ignite/recovery/2019-08-30,11:13/flist -a 29886070

* Preparing to create a system archive.

* Archiving contents of hatux5b.3valleys.co.uk via tar image to local device /dev/rmt/0mn.
NOTE: You are not allowed to interrupt this program at this time.
If an archive is being generated at this time, this will result
in a damaged archive that cannot be used for recovery.

ERROR: The interrupted_from_keyboard command failed (exit status 1).


======= 08/30/19 12:26:12 BST make_tape_recovery completed unsuccessfully

 

Is it waiting for some interaction?  SHould i just let it run for longer?

Regards

Tariq

Torsten.
Acclaimed Contributor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

looks like it was still running and needs more time.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tazhasan
Occasional Advisor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

OK, I think think I'll cron one tonight.

Thanks Torsten

I'll let youknow how I get on.

Torsten.
Acclaimed Contributor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

finished successfully?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
tazhasan
Occasional Advisor

Re: IA64 Ignite backup of rx2660 hanging at "WARNING: You are about to create an Itanium-based

Wow Torsten

You're on the ball.

Looks like it did.

 

Making Ignite for hatux5b.3valleys.co.uk : Fri Aug 30 15:15:00 BST 2019

** 0 - The Volume Group or Filesystem is Not included in the
System Recovery Archive
** 1 - The Volume Group or Filesystem is Partially included in the
System Recovery Archive
** 2 - The Volume Group or Filesystem is Fully included in the
System Recovery Archive

* Scanning system for IO devices...
* Boot device is: 0/1/1/0.0xbccea3c04061bb.0x0
WARNING: The volume group /dev/vg00 will be only partially included in the
System Recovery Archive. This means that not all files and
directories on this volume group will be restored when the archive is
installed. This message can be suppressed using the "-P s" option for
make_tape_recovery. See make_tape_recovery(1M) for more details.

WARNING: You are about to create an Itanium-based recovery tape. If this
system does NOT support direct tape boot, you will need to perform
"two-step media recovery" where the boot media (CD or DVD) has the
same version of Ignite-UX as the version on this tape.
* Archive created and rewind the tape to beginning of tape.

* Cleaning up old configuration file directories
* Creating local directories for configuration files and archive.

======= 08/30/19 15:15:02 BST Started /opt/ignite/bin/make_tape_recovery.
(Fri Aug 30 15:15:02 BST 2019)
@(#)Ignite-UX Revision C.7.17.391
@(#)ignite/net_recovery (opt) Revision:
/branches/IUX_RA1311/ignite/src@86032 Last Modified: 2013-11-11
10:36:33 +0530 (Mon, 11 Nov 2013)

* Recovery Archive Description = Recovery Archive

* Recovery Archive Location = /dev/rmt/0mn

* Number of Archives to Save = 2

* Pax type = tar


In? dsk/vg name minor# Associated disks/mountpoints
1 v /dev/vg00 0x00 /dev/disk/disk2_p2
/dev/vg00/lvol1 /stand 2
/dev/vg00/lvol2
/dev/vg00/lvol3 / 2
/dev/vg00/lvol4 /tmp 2
/dev/vg00/lvol5 /var/opt/perf 0
/dev/vg00/lvol6 /home 2
/dev/vg00/lvol7 /opt 2
/dev/vg00/lvol8 /usr 2
/dev/vg00/lvol9 /var 2
/dev/vg00/lvol10 /var/adm/crash 0
/dev/vg00/lv_ignite /opt/ignite 0
0 v /dev/vgomnishared 0x71 /dev/disk/disk21
/dev/vgomnishared/lvol1 /var/opt/omni 0
/dev/vgomnishared/etc_omni /etc/opt/omni 0
0 v /dev/vgTVWCAT11g 0x70 /dev/disk/disk26 /dev/disk/disk27 /dev/disk/disk25
/dev/vgTVWCAT11g/lvol2 /dataprotector_dump 0
/dev/vgTVWCAT11g/audit /var/.audit 0
/dev/vgTVWCAT11g/tvwcat /u02/oradata/TVWCAT 0
/dev/vgTVWCAT11g/u01 /u01 0
/dev/vgTVWCAT11g/oms10g /u01/app/oracle/oms10g 0
/dev/vgTVWCAT11g/lvol7
0 v /dev/vgignite 0x02 /dev/disk/disk19
/dev/vgignite/lvol1 /var/opt/ignite 0
0 v /dev/vgomnitmp 0x05 /dev/disk/disk44
/dev/vgomnitmp/lv_omnitmp
0 v /dev/vgtallycat 0x66 /dev/disk/disk57
/dev/vgtallycat/lvol1 /u01/app/TALLYPROD/backup 0
* Checking Versions of Ignite-UX filesets
* Creating System Configuration.
* /opt/ignite/bin/save_config -f
/var/opt/ignite/recovery/2019-08-30,15:15/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Backing Up Volume Group /dev/vgomnishared
* /usr/sbin/vgcfgbackup /dev/vgomnishared
* Creating Map Files for Volume Group /dev/vgomnishared
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgomnishared.mapfile
/dev/vgomnishared

* Backing Up Volume Group /dev/vgTVWCAT11g
* /usr/sbin/vgcfgbackup /dev/vgTVWCAT11g
* Creating Map Files for Volume Group /dev/vgTVWCAT11g
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgTVWCAT11g.mapfile
/dev/vgTVWCAT11g

* Backing Up Volume Group /dev/vgignite
* /usr/sbin/vgcfgbackup /dev/vgignite
* Creating Map Files for Volume Group /dev/vgignite
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgignite.mapfile
/dev/vgignite

* Backing Up Volume Group /dev/vgomnitmp
* /usr/sbin/vgcfgbackup /dev/vgomnitmp
* Creating Map Files for Volume Group /dev/vgomnitmp
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgomnitmp.mapfile
/dev/vgomnitmp

* Backing Up Volume Group /dev/vgtallycat
* /usr/sbin/vgcfgbackup /dev/vgtallycat
* Creating Map Files for Volume Group /dev/vgtallycat
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vgtallycat.mapfile
/dev/vgtallycat

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c
/var/opt/ignite/recovery/2019-08-30,15:15/archive_cfg -g
/var/opt/ignite/recovery/2019-08-30,15:15/flist -n 2019-08-30,15:15 -r
ipf -b 64 -d Recovery\ Archive -t 22 -i 1 -m t
* Saving the information about archive to
/var/opt/ignite/recovery/previews
* Creating The Tape Archive
* Checking configuration file for Syntax
* Complete writing boot LIF onto tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mn -t n -s
local -n 2019-08-30,15:15 -m t -w
/var/opt/ignite/recovery/2019-08-30,15:15/recovery.log -u -R -g
/var/opt/ignite/recovery/2019-08-30,15:15/flist -a 29889830

* Preparing to create a system archive.

* Archiving contents of hatux5b.3valleys.co.uk via tar image to local device /dev/rmt/0mn.
* Creation of system archive complete.


======= 08/30/19 16:41:29 BST make_tape_recovery completed with warnings
WARNING !!! Ignite make_tape_recovery - Finished: Return code=2

 

Are the warnings anything to worry about, particularly the one about creating an itanium based tape?

 

Regards

 

Tariq