System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

IGNITE ISSUES BETWEEN DIFFERENT SERVERS

frederick hannah
Super Advisor

IGNITE ISSUES BETWEEN DIFFERENT SERVERS

I created an ignite tape from a L2000 server and want to know if I can use the tape to ignite the L2000's operating system on an rp7400.
3 REPLIES
Johnson Punniyalingam
Honored Contributor

Re: IGNITE ISSUES BETWEEN DIFFERENT SERVERS

Hi ,

Please check below thread, I hope you can't

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1260081086206+28353475&threadId=721780

Thanks,
Johnson
Problems are common to all, but attitude makes the difference
R.K. #
Honored Contributor

Re: IGNITE ISSUES BETWEEN DIFFERENT SERVERS

Hi Fred,

Probably you can retore it on rp7400.
Only thing is, while restoring, you might need to go "advance installation", select "different hardware" and then continue.

Another thing that you have to take care is that the drivers (specially for NIC cards) for rp7400 should be present in your L2000 server before backing it up (through ignite).

That is all as far as I believe.
Don't fix that what ain't broke
Torsten.
Acclaimed Contributor

Re: IGNITE ISSUES BETWEEN DIFFERENT SERVERS

SInce L2000 and N4000 (rp5400 and rp7400) are very similar, this should work.

Where is the ISSUE?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!