cancel
Showing results for 
Search instead for 
Did you mean: 

Ignite Image on a NFS mount

SOLVED
Go to solution
David Willams
Super Advisor

Ignite Image on a NFS mount

How to take Ignite Image on a NFS mount and recover it on a different server, so that I will have two similar systems.

and after recovering the Image on the target server, I want to retire the Old server.

This is on a pa-risc server running 11.11.

3 REPLIES
Bill Hassell
Honored Contributor
Solution

Re: Ignite Image on a NFS mount

Ignite/UX has its own networking interface that uses NFS. Setup an Ignite network server and backup the server(s). You can then restore the image on a different target (assuming that the target is similar architecture). The details are in the Ignite manual:

http://docs.hp.com/en/5992-6584/


Bill Hassell, sysadmin
David Willams
Super Advisor

Re: Ignite Image on a NFS mount

>Setup an Ignite network server

I know how to setup an Ignite server.... what is Ignite network server

>and backup the server(s).

how is this done

>You can then restore the image on a different target (assuming that the target is similar architecture).

could you give me a step by step procedure plz
David Willams
Super Advisor

Re: Ignite Image on a NFS mount

.