System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Ignite Software installation procedure

SOLVED
Go to solution
Md. Farhan A Azam
Trusted Contributor

Ignite Software installation procedure

Hi,

I want to install Ignite software in my hpux server (11.11) from a depot.

#swinstall -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot Ignite-UX

can anyone tell me that it will ask to restart the server or not and above mentioned command is OK.
12 REPLIES
Suraj K Sankari
Honored Contributor

Re: Ignite Software installation procedure

Hi,

You can use autoreboot=false

swinstall -x autoreboot=false -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot Ignite-UX


Suraj
Leonard C.
Frequent Advisor

Re: Ignite Software installation procedure

Hi Farhan,

The installation of Ignite-UX on HP-UX 11.23 does not require rebooting. I think same situation on 11.11

"swinstall -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot" must work properly.

Regards.
Md. Farhan A Azam
Trusted Contributor

Re: Ignite Software installation procedure

Hi,

Thsnks.......but can u tell me that , it will ask to restatrt the server or not. because server is in production.

If i'll go with
swinstall -x autoreboot=false -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot Ignite-UX
this command. it won't boot the server, but ignite will work properly.
yulianto piyut
Valued Contributor
Solution

Re: Ignite Software installation procedure

NO, no need to restart when ignite UX installation. just do swinstall -s /ignite_ux_source \*
yulianto piyut
Valued Contributor

Re: Ignite Software installation procedure

Server will not ask to restart system
Md. Farhan A Azam
Trusted Contributor

Re: Ignite Software installation procedure

Hi, i tried with below command but its giving error.

# swinstall -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot Ignite-UX

======= 11/26/08 11:14:07 IST BEGIN swinstall SESSION
(non-interactive) (jobid=rangerfm-0071)

* Session started for user "root@rangerfm".

* Beginning Selection
* Target connection succeeded for "rangerfm:/".
* Source:
/tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot
* Targets: rangerfm:/
* Software selections:
+ IGNITE,r=C.7.7.98,a=HP-UX_B.11.00_32/64,v=HP
Ignite-UX.BOOT-COMMON-PA,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-11,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-11,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,r=C.7.7.98,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.7.98,fa=HP-UX_B.11.11_32/64
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/.sw/sessions/swinstall.last".
* "rangerfm:/": 1 bundles have the selected revision already
installed.
* "rangerfm:/": 1 filesets were determined to be skipped in the
analysis phase.
ERROR: "rangerfm:/": 1 files had errors during this operation.
ERROR: "rangerfm:/": 2 filesets had errors.
* The execution phase failed for "rangerfm:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log rangerfm-0071 @ rangerfm:/".

======= 11/26/08 11:14:41 IST END swinstall SESSION (non-interactive)
(jobid=rangerfm-0071)

#

this is something urgent... plz suggest on it.
Sagar Sirdesai
Trusted Contributor

Re: Ignite Software installation procedure

swinstall -s /tmp/Ignite-UX-11-11_C.7.7.98_HP-UX_B.11.00_32_64.depot -x reinstall=true Ignite-UX

Please issue the above command.


Sagar
Dennis Handly
Acclaimed Contributor

Re: Ignite Software installation procedure

You'll need to do that swjob to get more details:
swjob -a log rangerfm-0071 @ rangerfm:/
Md. Farhan A Azam
Trusted Contributor

Re: Ignite Software installation procedure

Hi, Issue resolved
Md. Farhan A Azam
Trusted Contributor

Re: Ignite Software installation procedure

Thanks for your suggesstions.
Dennis Handly
Acclaimed Contributor

Re: Ignite Software installation procedure

>Issue resolved

It would be helpful if you mentioned how you resolved it for anyone reading this thread.

Also please read the following about reopening and assigning points:
http://forums.itrc.hp.com/service/forums/helptips.do?#41
http://forums.itrc.hp.com/service/forums/helptips.do?#33
Md. Farhan A Azam
Trusted Contributor

Re: Ignite Software installation procedure

Hi All,

I tried to install from CD...........and its completed successfully.