cancel
Showing results for 
Search instead for 
Did you mean: 

Input errors(ierrs) on lan0

 
Bunti
Occasional Contributor

Input errors(ierrs) on lan0

 

Hello,

at lan0 we are having high input errors.

How can we clear this input errors?

In lanadmin utility can we  clear    = Clear statistics registers

will it impact on lan0 network settings/configuration?

As this is a production i dont want anything to get impacted if i cleat statistics registers.

 

 

vfauh133[/home/yg09958]# netstat -irn
Name      Mtu  Network         Address         Ipkts   Ierrs Opkts   Oerrs Coll
lan0      1500 10.97.255.0     10.97.255.39    2757325709 42990832 2220285171 0     0
lo0       4136 127.0.0.0       127.0.0.1       222519131 0     222519186 0     0
lan900    1500 10.97.250.0     10.97.250.16    3090228318 0     3571179628 0     0
vfauh133[/home/yg09958]#

2 REPLIES
rariasn
Honored Contributor

Re: Input errors(ierrs) on lan0

Hi:

 

No problem

 

lanscan

Hardware Station        Crd  Hdw   Net-Interface    NM   MAC       HP-DLPI DLPI
Path     Address        In#  State NamePPA          ID   Type      Support Mjr#
0/0/0/0  0x00306E0CFC53 0    UP    lan0 snap0       1    ETHER       Yes   119
0/6/0/0  0x00306E0C95DD 1    UP    lan1 snap1       2    ETHER       Yes   119

lanadmin --> lan

LAN Interface test mode. LAN Interface PPA Number = 0 <-- Card instance of lanscan command

To change, you can use ppa command

clear

Clearing LAN Interface statistics registers.

quit

 

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02259700/c02259700.pdf

 

 

The lanadmin, lanscan, and linkloop commands are deprecated. These commands will be
removed in a future HP-UX release. HP recommends the use of replacement command nwmgr(1M) to
perform all network interface-related tasks.

 

 

 

 

 

rgs

 

 

Bunti
Occasional Contributor

Re: Input errors(ierrs) on lan0

Thanks a lot for the inputs..

your suggestion worked perfectly.


rariasn wrote:

Hi:

 

No problem

 

lanscan

Hardware Station        Crd  Hdw   Net-Interface    NM   MAC       HP-DLPI DLPI
Path     Address        In#  State NamePPA          ID   Type      Support Mjr#
0/0/0/0  0x00306E0CFC53 0    UP    lan0 snap0       1    ETHER       Yes   119
0/6/0/0  0x00306E0C95DD 1    UP    lan1 snap1       2    ETHER       Yes   119

lanadmin --> lan

LAN Interface test mode. LAN Interface PPA Number = 0 <-- Card instance of lanscan command

To change, you can use ppa command

clear

Clearing LAN Interface statistics registers.

quit

 

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02259700/c02259700.pdf

 

 

The lanadmin, lanscan, and linkloop commands are deprecated. These commands will be
removed in a future HP-UX release. HP recommends the use of replacement command nwmgr(1M) to
perform all network interface-related tasks.

 

 

 

 

 

rgs

 

 


Thanks a lot.

Your suggestion worked perfectly.