System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation LINUX on DL380G5 server

 
SOLVED
Go to solution
meekrob
Super Advisor

Installation LINUX on DL380G5 server

Hi ,

i need to install LINUX redhat on a DL380 G5 server ,
did i need a driver to install before i use the smart start to recognise the smartarray ,

thank you
1 REPLY
Steven E. Protter
Exalted Contributor
Solution

Re: Installation LINUX on DL380G5 server

Shalom,

I work with these servers a lot.

There is usually no need to even use smartstart on these systems. At boot there is a prompt to get into bios and that can configure most arrays.

Smartstart will let you do some other good things including making sure bios/firmware is up to date.

The system is shipped redhat ready. Certain disk arrays will require smartstart configuration.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com