cancel
Showing results for 
Search instead for 
Did you mean: 

Installation Procedure

Marvin Diaz
Occasional Contributor

Installation Procedure

Hi everybody,

I am new in handling a Tru64 UNIX, before i was used to do an HP-UX, can anybody help me on how to install to new machine the O.S.

regards,
Marvin
2 REPLIES
Ralf Puchner
Honored Contributor

Re: Installation Procedure

Put the cdrom into the drive, type in "boot dka400" (if dka400 is your cd-rom drive, check with "show device" first) on SRM console (">>>"). Follow the instructions on screen.

It is as simple as installing an windows machine ;-)
Help() { FirstReadManual(urgently); Go_to_it;; }
Dave Bechtold
Respected Contributor

Re: Installation Procedure

Hi Marvin,

If you are looking for documentation to help you get started, I'd reference the Installation Guide and Release Notes found online at ...

http://h30097.www3.hp.com/docs/pub_page/doc_list.html

Here you will find bookshelfs of documentation for specific versions of the operating system. Select the appropriate version for the distribution you have, then under System & Network Management you will find the Installation Guide, Advanced Installation Guide and the Release Notes. The Adv. Install Guide covers more advanced features like RIS (Remote Installation Services), cloning systems, Worldwide Language support, details on planning disk space, and using the Shell during an installation - good for problem recovery.

Hope this helps. If you have more specific questions, fire away!

Regards,
Dave Bechtold