HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Installed HP Integrity VM,, but getting "HPVM currenlty not running"

 
SOLVED
Go to solution
f. halili
Trusted Contributor

Installed HP Integrity VM,, but getting "HPVM currenlty not running"

Hello,

Installed HP Integrity VM ( T267CC ). Machine rebooted fine, and T267CC shows in swlist. When I run hpvmstatus, I am getting:

hpvmstatus: HPVM currently not running.
hpvmstatus: Unamble to continue.

I ran hpvmstart and still got the same message.

Thanks,
f. halili
derekh
8 REPLIES
Torsten.
Acclaimed Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

hpvmstart is for starting guests, not host software.

Any errors/warnings during install?

Consider to post

# hpvmstatus -v

# swlist

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
f. halili
Trusted Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

Hello Torsten,

I ran hpvmstatus -v and got the same two lines.

I'm still working via console ( dumb terminal ) as I'm still waiting for the network guys so I can't paste the output. What in praticular do you want to see in the swlist?

Thanks,
f. halili
derekh
Torsten.
Acclaimed Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

If all components are installed and what version it is.

For example, if HP SIM is installed, only a few minor components will be installed, the main components will be excluded, hence no HPIVM.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
f. halili
Trusted Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

Hello Torsten,

I checked for the inhibitors (1) hfs (2) HPSIM ,and VirtualPartition and they are not installed.

For the VM release the following are not there:
VNProvider
VSE-OE
PRM-Sw Krn
B8465BA

The ones below got installed:
T2767CC
VMGuestLib
VMGuestSW
VMKernelSW

thanks,
f.halili
derekh
Torsten.
Acclaimed Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

Still not sure what version you are running ... 3.5, 4.0, 4.1 ... ?


Did you check all needed patches already?


However, if the software is installed, you should see

# hpvmstatus
hpvmstatus: No guests currently configured.

at the beginning, so I think there was something wrong during install. Consider to review the install log.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
f. halili
Trusted Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

I am installing 4.1

I will check logs and pre-req again.

Do you know of pre-req list for 4.1?

thanks,
f. halili

derekh
Olivier Masse
Honored Contributor
Solution

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

Confirm that Hyper-Threading is deactivated on that server (use setboot).
f. halili
Trusted Contributor

Re: Installed HP Integrity VM,, but getting "HPVM currenlty not running"

thanks.
derekh