HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing Hp-UX September 2004 v2 on rx2660

 
SOLVED
Go to solution
Atul Goel
Frequent Advisor

Installing Hp-UX September 2004 v2 on rx2660

Hello,


Is it possible to install HP-UX sept 2004 v2 on new rx2660??

Regards,
Atul
5 REPLIES
Frank de Vries
Respected Contributor
Solution

Re: Installing Hp-UX September 2004 v2 on rx2660

In principle yes;
but seems odd you want to go back in time.
What is more relevant is to check the hardware compatibility list,
cos even one rx2660 could have a different
card inside then another.

In any case take an ignite backup of your boot disks so that you can roll back
in case shit hits the fan
Look before you leap

Re: Installing Hp-UX September 2004 v2 on rx2660

The rx2660 isn't documented as supported until May 2005:
http://docs.hp.com/en/5991-0792/ch02s03.html
Torsten.
Acclaimed Contributor

Re: Installing Hp-UX September 2004 v2 on rx2660

You need june 2007 or newer because of new devices (e.g. SAS and CPU):

http://docs.hp.com/en/5992-4044/ch02s03.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
James R. Ferguson
Acclaimed Contributor

Re: Installing Hp-UX September 2004 v2 on rx2660

Hi:

Why would you want to install a 4-year old version of an operating environment on new hardware anyway?

If you purchased a new rx2660, then you should have received current (ca. June 2008) DVD OE media with it. Use those!

Regards!

...JRF...
Steven E. Protter
Exalted Contributor

Re: Installing Hp-UX September 2004 v2 on rx2660

Shalom,

I believe you can not install that release of HP-UX on that hardware.

As I recall from a visit to the HP performance center September 2006 HP-UX version 2 or later is the minimum requirement for that hardware.

You can try but HP might not support you. I'd check with HP support prior to going forth with this particular installation.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com