Kernel configurable parameter remain unchanged after process new kernel

[Md. Minhaz Khan]

Dear ALL:

We are trying to modify some kernel parameters as given in below table but the problem is:â After modifying & process new kernel through SAM, Kernel configurable parameter remains unchangedâ . We also reboot the server but no works. I have attached a file which is an example what we have done through SAM for the below parameters.


Beside this â lanscanâ command didnâ t show any output & during taking nickel it shows some error which is attached with this mail. If you need more information, please let me know


Note: Model of this server is RP3440 & OS version B.11.11

dbc_max_pct 10
dbc_min_pct 5
semmnu 4092
nproc 4096
nfile 63488
ninode 34816
nflocks 4096
semmni 4096
semmns 8192
shmmni 512
shmseg 120
maxswapchunks 16384
vps_ceiling 64
ksi_alloc_max 32768
executable_stack 0
max_thread_proc 1024
maxuprc 3 687
MAXDSIZ 1073741824
MAXDSIZ_64BIT 2147483648
MAXSSIZ 134217728
MAXSSIZ_64BIT 1073741824
MSGMNI 4096
MSGSEG 32767
NCSIZE 35840
SEMMAP 4098
MSGTQL 4096
MSGMAP 4098
NKTHREAD 7184



Thanks
Minhaz

[Asif Sharif]

Salam Minhaz,

What is quality pack installed? also please post the lanscan output or error which you got?


Regards,
Asif Sharif

[Md. Minhaz Khan]

Dear Asif

"lanscan" command output shows nothing even no error.



Thanks
Minhaz

[Mahamudul Hassan]

Hi Dear,

You may do the following:

SAM --> kernel configuration --> Configurable parameters --> Then we have to select any parameters (Ex: maxvgs) by clicking sapce bar --> Action --> Modify configurable parameters--> Now we have to enter the new value in "Formula / Value ---------"---> then Action --> Apply tuned parameter set (For applying new changes) ---> process new kernel (It will backup old kernel like "vmunix.prev" & "system.prev" and build the new kernel like "vmunix" & "system".


Rdgs,
M.Hassan

[Md. Minhaz Khan]

Dear Mahmud Vhai:

I have already done this but no works

Thanks
Minhaz