cancel
Showing results for 
Search instead for 
Did you mean: 

LSM Installation

SOLVED
Go to solution
François Brugère
Frequent Advisor

LSM Installation

Hello All,

I would like install LSM on my test cluster which is running Tru64/TruCluster V5.1B PK3. But I received this error message after this command setld -l /cdrom2 OSFLSMBASE540 :

1 subsets will be installed.

Loading subset 1 of 1 ...

Logical Storage Manager
Copying from /cdrom2 (disk)
pax: sbin/init.d/lsm : Permission denied
pax: sbin/rc0.d/K59lsm : Permission denied
pax: sbin/rc3.d/S59lsm : Permission denied
setld:
File copy to system disk failed.

Subset OSFLSMBASE540 may not have been installed properly on your system
but the rest of the installation will continue.
Verifying
setld:
There were verification errors for "Logical Storage Manager" (OSFLSMBASE540)

0 of 1 subsets installed successfully.

Is anobody has an idea ?

Thanks in advance.

Francois
7 REPLIES
Michael Schulte zur Sur
Honored Contributor

Re: LSM Installation

Hi,

are you using root?

greetings,

Michael
François Brugère
Frequent Advisor

Re: LSM Installation

Yes, off course.
Michael Schulte zur Sur
Honored Contributor

Re: LSM Installation

Hi,

I just wanted to make sure. ;-)
Please post:
ls -l /sbin/*.d/*lsm
Is there another version of lsm already on it?

thanks,

Michael
François Brugère
Frequent Advisor

Re: LSM Installation

Hello Michael,

Thanks for your help. Here is the result of this command setld -i | grep LSM :

keyone11#root>setld -i | grep LSM
OSFLSMBASE540 load failed Logical Storage Manager (System Administration)
OSFLSMBIN540 installed Logical Storage Manager Kernel Modules(Kernel Build Environment)
OSFLSMX11540 not installed Logical Storage Manager GUI (System Administration)
setld: Exiting
keyone11#root>

And here is the answer of your question :

keyone11#root>ls -l /sbin/init.d/lsm
-rwxr-x--- 1 bin bin 0 Oct 17 2002 /sbin/init.d/lsm

I join to this post the complete output of the installation attempt of the base LSM subset.

Francois.
Michael Schulte zur Sur
Honored Contributor

Re: LSM Installation

Hi,

I assume, the lsm installation is new.
I don't think, you can install lsm by trying to install single subsets.
Deinstall all the subsets of lsm and then
try with setld -l /cdrom2/ALPHA/BASE
Look for lsm there.

hth,

Michael
François Brugère
Frequent Advisor

Re: LSM Installation

Thanks for your help Michael. Finaly, I received from the support center the solution to my problem. The pax error was due to a misconfigured option on the NFS mount. I mounted the Tru64 CDROM from my linux box to the server through NFS protocol. But I forgot to set the no_root_squash in /etc/exports file on the linux box for the /cdrom filesystem.

After this setting, I was able to install the LSM base subset. Now, I have to install another and reappli the PK3.

Francois.
Michael Schulte zur Sur
Honored Contributor
Solution

Re: LSM Installation

Hi,

happy to hear that. ;-)
That was a small detail, however I don't know, whether it would have been helpfull for me to help you.

greetings,

Michael

zero points for this one.