cancel
Showing results for 
Search instead for 
Did you mean: 

LSM problem

vofsky
Frequent Advisor

LSM problem

Could anyone give me a hand?I can not exec volsetup command after I loaded os. The version of tru64 is 5.1b and I have enter the license lsm_oa.And also I can not exec vloprint,voldiskadm...any advice is appreciated!
4 REPLIES
Ralf Puchner
Honored Contributor

Re: LSM problem

how about an error message?
Help() { FirstReadManual(urgently); Go_to_it;; }
vofsky
Frequent Advisor

Re: LSM problem

Hi Ralf,
when I exec volsetup dsk1 commando it indicates:
Checking for an existing LSM configuration
A previous LSM configuration exists (err=22).
Use the '-o force' option to reinitialize LSM.
Stop.
Hein van den Heuvel
Honored Contributor

Re: LSM problem

So maybe there is an lsm setup?
During the install, did you allow it to bring the system disk under lsm control? (Something we don't like in the lab... seems only usefull if yo intend to mirror the system disk).

Is this a cluster and do you need to start the vold everywhere? rsh nond volsetup -s ?

Do what the error message said... use -f to blow an old setup away?

Or is it useable and are you ready for voldiskadd?

Is vold running?
Can you start that with vold -k perhaps?
(lsm:vold: ERROR: cannot open /dev/volconfig: No such file or directory ?)

.... talk to us, and we'll try to help, but we can not read your mind nor your screen!

Hein.


When you tried volprint, what does it tell you? (lsm:volprint: ERROR: IPC failure: Configuration daemon is not accessible ?)


vofsky
Frequent Advisor

Re: LSM problem

yeap,The error displayed as you mentioned above