Operating System - HP-UX
1748149 Members
3540 Online
108758 Solutions
New Discussion юеВ

Re: LVol Cascade Failure - and drive corruption

 
SOLVED
Go to solution
rmueller58
Valued Contributor

LVol Cascade Failure - and drive corruption

Guys, have an FE on the way with a replacement drive to replace a suspect failed drive.

We have a 4SI Raid Card with 4 Drives as near as I can tell in the vg03.

I had one mounted file system on this LVOL, and now when I attempt to mount it, I get the following error..

# mount /restore
vxfs mount: /dev/vg03/restore is corrupted. needs checking

Apparently the LVOL failed consistency when we marked them back online.. any thoughts on what I need to do to recover this?



2 REPLIES 2
sujit kumar singh
Honored Contributor
Solution

Re: LVol Cascade Failure - and drive corruption

hi did u try by checking the FS ?

what was the result?

do the following:

#fsck -F vxfs -o nolog,full /dev/vg03/restore

ans see if waht happens

also can u give #ioscan -fn
#ioscan -kfnCdisk
#vgdisplay -v vg03
that sghall help know ur VG better and any utility that can tell the status of the RAID Volumes on the card?


Regards

Sujit
rmueller58
Valued Contributor

Re: LVol Cascade Failure - and drive corruption

Sujit that did it.. thanks !!