MCSG - Cluster lock disk issue

[Arun Kesav]

Hi All ,

I am having 2 node cluster running. Sometime the cluster lock disk was accidentally removed and after that it was fixed back . It has 2 cluster lock disks. In one node it says both the disks are up and on the other node it says 1 up and other down.

OS Version : HP-UX 11.23
SG Version : A.11.18.00

Below is the cmviewcl o/p.

tlscim05:/root#cmviewcl -v

CLUSTER STATUS
test-cl2 up

NODE STATUS STATE
test05 up running

Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vgewm /dev/dsk/c12t5d2 down
/dev/vgspc /dev/dsk/c10t1d3 up

NODE STATUS STATE
test 06 up running

Cluster_Lock_LVM:
VOLUME_GROUP PHYSICAL_VOLUME STATUS
/dev/vgewm /dev/dsk/c12t5d2 up
/dev/vgspc /dev/dsk/c10t1d3 up


Please suggest how to proceed with this to make sure the clust lock disk becomes up in 1st node. I am getting frequesnt message in syslog stating the cluster lock disk is missing on both nodes.

Regards
Arun

[sujit kumar singh]

hi

Please post full #cmviewcl -v and the #cmviewconf screen shots


also if you can provide the cmgetconf O/P.

and also
#bdf from both the nodes.

Regards
sujit

[Aneesh Mohan]

Hi Arun,

Please try

#pvchange -a y /dev/dsk/c12t5d2 (in node1)


Aneesh

[Sunny123_1]

Hi

Also check your fiber cable status through fcmsutil


Regards
Sunny

[Arun Kesav]

Hi All ,

I have used the cminitlock utility. The issue got resolved.

regards
Arun Kesavan

[Arun Kesav]

Issue resolved using cminitlock utility.