cancel
Showing results for 
Search instead for 
Did you mean: 

MSL600 tape lib

jousif
Frequent Advisor

MSL600 tape lib

Hi Admins,
related to trucluster 5.1A,F.C switch,tape library msl6000,
tape library is known from cluster members,
I connect new server to the F.C switch and run
# hwmgr scan scsi
but the tape library dosnt known to new server
I need to use the tape library from this server.
and i run #scu scan edt command
please advise.
6 REPLIES
Ivan Ferreira
Honored Contributor

Re: MSL600 tape lib

Normally, the drive will recognize the new host if you reboot the host or if you reboot the library.

You could also use th "Edit Host List for Current Map" in the NSR menu to manually add a host.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
jousif
Frequent Advisor

Re: MSL600 tape lib

Hi Ivan,
thanks,
I reboot both server and tapelibrary,
same problem,
is there are any software I should install in unix,
please advise.
Ivan Ferreira
Honored Contributor

Re: MSL600 tape lib

If you installed a NEW HBA on the server (probably the first), you may need to recompile the kernel to add the HBA driver to the kernel.

You should also ensure that the HBA is being seen by the SAN switch, enter to the SAN Switch and run switchshow to check that the HBA WWID is detected in the port that is connected.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
jousif
Frequent Advisor

Re: MSL600 tape lib

Hi evan,
many thanks,
ivan the server connected to F.C switche,
the F.C switch is is trucluster F.C swicth,
the server see cluster disks via F.C adapter
and tape library is connected to F.C cluster switch
I recompile kernel,no result,
I run
# scu scan edt
#dsfmgr -k
#dsfmgr -k
# hwmgr scan scsi
no resultes
please advise,
Ivan Ferreira
Honored Contributor

Re: MSL600 tape lib

Maybe, this could be a zoning problem, check your zoning configuration or post the output of cfgshow, and indicate the ports that are connected to these hosts.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
jousif
Frequent Advisor

Re: MSL600 tape lib

Hi Ivan,
I dont use zonning ,
thanks.