System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Make recovery in HP-UX 11.23

sanwin
Frequent Advisor

Make recovery in HP-UX 11.23

Hi,
How to take make recovery in HP-UX 11.23
I am not sure about the syntax.

Could anyone help me in this regard.

I need to get the resulting tar ftpied to some other server.

Thanks!!

Regards,
Sanwin
4 REPLIES
Sajjad Sahir
Honored Contributor

Re: Make recovery in HP-UX 11.23

Dear friend

load the writeble tape
make_tape_recovery -x inc_entire=vg00
a tape will be create without further interaction

thanks and regards

Sajjad Sahir
Sunny123_1
Esteemed Contributor

Re: Make recovery in HP-UX 11.23

Hi

If you want tar ftpied to other server then use make_net_recovery
1.Log on to the server where you want to save the recovery backup
2.Edit the entry in /etc/exports
3.exportfs -av
4.Log on to the server which you want to make recovery
5.make_net_recovery -v -s -a

Regards
Sunny
Sunny123_1
Esteemed Contributor

Re: Make recovery in HP-UX 11.23

Hi

If you want to use tape then use make_tape_recovery command.

make_tape_recovery -A -v -I -X inc_entire=vg00

Regards
Sunny
Steven E. Protter
Exalted Contributor

Re: Make recovery in HP-UX 11.23

Shalom,

If you use make_tape_recovery you can't practically ftp the results to another server.

It writes at tape.

If you want to get the results to another server, set up an NFS share on the other server with write privileges and use make_net_recovery to write the results directly to the NFS share.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com