System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Migrate from Superdome vpar to BL860c

 
SOLVED
Go to solution
rleon
Regular Advisor

Migrate from Superdome vpar to BL860c

Hi everyone ..

 

I have a BL860c ..

 

We are moving a SAN  BOOTED superdome vpar to a blade BL860c.


The EMC storage has been moved from the superdome to the blade and I am able to boot from the blade with no issues.,

Everything is fine except for the lan driver.


# ioscan -fnkC lan
# lanscan
error:  no PPAs available

 

I think I just need a driver .. but HP cant seen to give me the correct driver.

 

HP Support cant seem to figure it out and have given the wrong driver twice.

I have installed

GigEther-01_B.11.31.1105_HP-UX_B.11.31_IA_PA.depot
HWEnable11i_B.11.31.1109.367a.depot


WIth no luck ..

 

Through sam (smh)

I can see the following device..

0/0/0/3/0/0/2                   unknown    PCIe Ethernet (14e41650)

 

From other servers similar to this one .. I know that this is the type of card.

lan       2  0/0/0/3/0/0/2  iexgbe   CLAIMED     INTERFACE    HP  PCIe 2-p 10GbE Built-in

 

Any ideas?

 

I dont have the CD's so a link for the .depot so I would appreciate a link or what I need to put in the search to download the driver. 

 

I have been messing with this all day ll any help or idea would be great.

 

2 REPLIES
Earl_Crowder
Trusted Contributor

Re: Migrate from Superdome vpar to BL860c

Perhaps this item from software.hp.com will do the trick:

 

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=BL8x0-i2

rleon
Regular Advisor
Solution

Re: Migrate from Superdome vpar to BL860c

Hi

 

Figured it out

 

After doing a google search for FlexNIC 11.31

 

— Go to the HP Software Depot website at:
http://www.software.hp.com/
— Search for 10GigEthr-02.

 

and it took me to

10GigEthr-02_B.11.31.1109_HP-UX_B.11.31_IA