cancel
Showing results for 
Search instead for 
Did you mean: 

Mirroring Npar ???

Nedved
Frequent Advisor

Mirroring Npar ???

Hi all,

I installed 4 vpars in my rx86.. series server. i mirrored all boot disks in 4 par's. But whether i need to mirror the 1'st vpar in the npar mode or not.

Can some one explain..
4 REPLIES
Torsten.
Acclaimed Contributor

Re: Mirroring Npar ???

just mirror it like all the others.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Mirroring Npar ???

Just make sure the AUTO file on **each** disk contains something like

"boot vpmon -a"

but NOT "boot vmunix", just in case you cold boot from the disk!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Nedved
Frequent Advisor

Re: Mirroring Npar ???

@Torsten

Thanks for yr responce...

i done everything and system is booting via both disks in vpar mode. but my questions may i need to miror the 1st vpar ( that is my npar if i booted in npar mode ). in the npar mode also...
Torsten.
Acclaimed Contributor

Re: Mirroring Npar ???

No, from OS point of view there is no difference if run in nPar or vPar mode here.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!