System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Mondo Restore Cannot See NICS

Craig Johnson_1
Regular Advisor

Mondo Restore Cannot See NICS

I made an image of a DL380 G6 that I built from scratch, SLES 11 SP1, because when I tried a G5 image on it Mondo couldn't see the NICS.

Well, now this G6 image is doing the same thing on another G6 I want to clone. I get an SIO error and "eth0 not found"

What's really odd is that the bnx2 driver is loaded, which is what the built G6 uses. What am I missing/doing wrong?

3 REPLIES
Craig Johnson_1
Regular Advisor

Re: Mondo Restore Cannot See NICS

An update. I booted from another, older boot iso and was able to activate networks. What would cause the boot iso that I'm creating at SLES 11 SP1 to not include the proper networking support?
Alzhy
Honored Contributor

Re: Mondo Restore Cannot See NICS

Suggest you open a case at mondorescue.org -- the guys there are responsive.

Dl380 G6 here too BUT running Redhat 5.X -- zilch issues .
Hakuna Matata.
Craig Johnson_1
Regular Advisor

Re: Mondo Restore Cannot See NICS

I should have responded to this long ago. The key was to install the beta version of Mindi for SLES 11.

mindi-2.0.7.6-0.20110128002916.sles11.x86_64.rpm