HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

Mount in vi/etc/fstab

 
sriprabhu
Occasional Contributor

Mount in vi/etc/fstab

how to add my mount in vi/etc/fstab
4 REPLIES

Re: Mount in vi/etc/fstab

(It would help if you used a subject that pertains to your questions.)
You could use SAM to add it for you.
What type of filesystem are you trying to mount?
Ishwar_1
Frequent Advisor

Re: Mount in vi/etc/fstab

Edit /etc/fstab file in vi Editor. Make an entry in fstab file as given in the example. Adding entry to the /etc/fstab file. Mounts Filesystem automatically every time system boots.

Example :-

/dev/vg00/lvol4 /home vxfs delaylog 0 2

First column :- in the file is the block device file used for the file system.
Second column:- represents the mount point that is /home in this example.
Third column :- is type of file system.
Forth Column :- 'delaylog' and other VxFS (JFS) mount options are documented in the man pages (1M) for 'mount_vxfs'.

"In delaylog mode, some system calls return before the intent log is written. This improves the performance of the system, but some changes are not guaranteed until a short time later when the intent log is written."

Technical Knowledge Base document For your reference.

http://forums13.itrc.hp.com/service/forums/getattachment.do?attachmentId=9157&ext=.htm

Fifth Column :- Backup Frequency
Sixth Column :- Fsck Order

Regards
Ishwar VenuGopal
vishnu.khandare
Respected Contributor

Re: Mount in vi/etc/fstab

Hi SriPabhu,

Its Easy to add mount point in vi /etc/fstab,
U must have root privilege's, as ur done with mount point creation.
For getting the mount point mounted automatically as system reboots u should add line in /etc/fstab as,
/dev/vg00/lvolX /ABC vxfs delaylog 0 2,
ur logical volumeX its mount point name ABC
file system, delaylog, Backup Frequency, and Fsck Order
in best practice we use above values.
Dont forget to save entry in this filewhile u create mount point, to avoid juggling after reboot.....

Hope this solves ur issues..
Don't forget to assign points..


Regards
Vishnu Khandare
You should deserve before U desire!!!!
sriprabhu
Occasional Contributor

Re: Mount in vi/etc/fstab

thanks