N4000 booting errors

[CompSysCon]

I have N4000 that can not boot. It displays these errors and its not bootable. Anny suggestions?

Any help would be greatly appreciated.

BTW,

Power board was replaced recently.

Booting...

Boot IO Dependent Code (IODC) revision 1

HARD Booted.

ISL Revision A.00.38  OCT 26, 1994

ISL booting  hpux -lq

Boot

: disk(0/0/2/0.6.0.0.0.0.0;0)/stand/vmunix

8007680 + 1064696 + 5414368 start 0x2576e8

alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa03000.

************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 07/09/2019 TIME: 03:51:44

ALERT LEVEL: 7 = reserved

REASON FOR ALERT

SOURCE: 0 = unknown, no source stated

SOURCE DETAIL: 0 = unknown, no source stated   SOURCE ID: FF

PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER

       FLASH    FLASH         OFF       OFF        ON

LED State: Running non-OS code.  Non-critical error detected.

Check Chassis and Console Logs for error messages.

0x0000407000FF6292 00000000 7FA03000 - type  0 = Data Field Unused

0x5800487000FF6292 00007706 0903332C - type 11 = Timestamp 07/09/2019 03:51:44

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:Timeout!

*****************************************

************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 07/09/2019 TIME: 03:51:49

ALERT LEVEL: 12 = Software failure

REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general   SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER

       ON       FLASH         FLASH     OFF        ON

LED State: System Running.  Unexpected Reboot.  Non-critical Error Detected.

Check Chassis and Console Logs for error messages.

0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code

0x58E008C01100B800 00007706 09033331 - type 11 = Timestamp 07/09/2019 03:51:49

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:Timeout!

*****************************************

************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 07/09/2019 TIME: 03:51:49

ALERT LEVEL: 12 = Software failure

REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general   SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER

       ON       FLASH         FLASH     OFF        ON

LED State: System Running.  Unexpected Reboot.  Non-critical Error Detected.

Check Chassis and Console Logs for error messages.

0xA0E000C01100B000 00000000 000005E9 - type 20 = major change in system state

0x58E008C01100B000 00007706 09033331 - type 11 = Timestamp 07/09/2019 03:51:49

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:Timeout!

*****************************************

************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 07/09/2019 TIME: 03:51:49

ALERT LEVEL: 12 = Software failure

REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general   SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER

       ON       FLASH         FLASH     OFF        ON

LED State: System Running.  Unexpected Reboot.  Non-critical Error Detected.

Check Chassis and Console Logs for error messages.

0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code

0x58E008C01100B800 00007706 09033331 - type 11 = Timestamp 07/09/2019 03:51:49

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:Timeout!

*****************************************

************* SYSTEM ALERT **************

SYSTEM NAME: uninitialized

DATE: 07/09/2019 TIME: 03:51:49

ALERT LEVEL: 12 = Software failure

REASON FOR ALERT

SOURCE: 1 = processor

SOURCE DETAIL: 1 = processor general   SOURCE ID: 0

PROBLEM DETAIL: 0 = no problem detail

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER

       ON       FLASH         FLASH     OFF        ON

LED State: System Running.  Unexpected Reboot.  Non-critical Error Detected.

Check Chassis and Console Logs for error messages.

0xA0E000C01100B000 00000000 000005E9 - type 20 = major change in system state

0x58E008C01100B000 00007706 09033331 - type 11 = Timestamp 07/09/2019 03:51:49

A: ack read of this entry - X: Disable all future alert messages

Anything else skip redisplay the log entry

->Choice:Timeout!

[RajUX]

Are you able to boot after acknowledging the alerts?

Try booting in maintenance mode.

If all above fails, suspect a hardware issue. Has the system booted properly at least once after replacing the faulty hardware?

[CompSysCon]

One of the bd drives was resetting the bbus, and cousing SCSI lbolt errors. thanks for all help.