N4000

[Rui Medeiros_1]

> Here is the error message that was on the console
>
> System Name: Uninitialized
>
> DATE 04/15/2005 TIME: 08:25:30
>
> ALERT LEVEL: 6= Boot possible, pending failure - action required
>
> REASON FOR ALERT
>
> SOURCE 8=I/O
>
> SOURCE DETAIL: 3=local bus adapter SOURCE ID: FF
> PORBLEM DETAIL: 6=configuration error
>
> LED RUN ATTENTION FAULT REMOTE POWER
> FLASH FLASH OFF ON ON
>
> 0x2000106683FF2164 000101FF FF06FF83 - type 4=Physical Location
> 0x5800106683FF2164 00006803 0F08191E - type 11=Timestamp
> 04/15/2004 08:25:30

[Jeff Schussele]

Hi Rui,

Sounds like you've had a hardware failure.
You should place a HW service call to HP to replace the failed part.

Rgds,
Jeff

[SS_6]

Look like some hardware problem. Make sure you also have make_recovery tape in case you need it.

[Sanjay_6]

Looks like a problem.

Alert Level 6 decodes as -> Boot possible, pending failure or environmental problem with action required (e.g., boot disk error rate above threshold, power failure, overtemp medium).

What was the cause of this problem. Did you add a new hardware and boot or is the system running and you got this message. Could be a controller problem. Has EMS logged anything if the system is running.

Hope this helps.

Regds