NFS share directory

[Jesse Delk]

I was sharing a directory /u01/exp between two HP-Ux servers.

CT1 - server trying to view the directory
CT2 - server with the directory

The server(CT2) with the directory that I was sharing, I had to power down and move to another location. I brought this server back up and I'm able to telnet into it and able to ping it from CT1.

When doing a bdf on CT1, it hangs up when it gets to the part where usually shows the shared directory.

I never umounted the directory on CT1 when I powered the CT2 server down.

Is there a service I need to restart on CT2 show that CT1 can see this directory? Is there something I need to restart on CT1?

[Geoff Wild]

Is it automounted or hard mounted (fstab).

It's best to use autmounts...

Try on CT1:

/sbin/init.d/nfs.client stop

/sbin/init.d/nfs.client start


BTW - which OS version are you using?

Rgds...Geoff

[Jesse Delk]

I believe it is 11.11 version 1 (Would know the command for that off the top of your head)

Below is the message I get when running the stop command on CT1.

/sbin/init.d/nfs.client stop

NFS_SERVER not set to one in /etc/rc.config.d/nfsconf, exiting.
killing rpc.lockd
killing rpc.statd
NFS_SERVER not set to one in /etc/rc.config.d/nfsconf, exiting.
umountall: umount : has failed.
umountall: diagnostics from umount
nfs umount: nfs_unmount: /u01/exp: is busy
umount: return error 1.
killing biod
killing automount

[Geoff Wild]

For OS, uname -a

For OE: swlist |grep OE

There is a 99% chance that you will have to reboot CT1 - as on 11.11 there is no force umount for NFS :(

After doing the /sbin/init.d/nfs.client start
try to mount the filesystem:

mount /u01/exp

If it's still won't work, then I'm pretty sure a reboot is required. :(

Rgds...Geoff

[Jesse Delk]

So I may have to reboot CT1? Is this because I did not umount the share before powering CT2 down.

Nothing I can do to force the umount?


# uname -a
HP-UX drtkcp1 B.11.11 U 9000/800 114444650 unlimited-user license

# swlist | grep OE
HPUX11i-OE B.11.11.0312 HP-UX 11i Operating Environment Component

[Geoff Wild]

You need to be using NFS Version 3 to be able to force umount a filesystem..

umount -f to recover from hung/stale NFS mounts without reboot

With 11.31, NFS gets completely revamped. By default it uses NFS V3 but also has NFS V4 on it.

Rgds...Geoff

[Simon Hargrave]

You have a stale NFS mount. It is generally better (especially when mounting read-only so consistency not required) to mount with -osoft so it doesn't hang.

However to fix the problem, you can use the following procedure. This will remove the stale mount connection on the client. BE CAREFUL though if you get it wrong you could kill arbitrary connections: -

-----

# netstat -an | grep 2049

Now look for the 2049 connection e.g. 140.1.234.204:1023 134.202.101.25:2049

If you want to use the tcp_discon_by_addr, you use a 24 byte string that contains the hex representation of the quadruple.

For example, if the connection that I want to delete is:

Local IP: 192.1.2.3 (0xc0010203)
Local Port: 1024 (0x0400)
Remote IP : 192.4.5.6 (0xc0040506)
Remote Port: 2049 (0x0801)

The "hex" string you pass to tcp_discon_by_addr is:

# ndd -set /dev/tcp tcp_discon_by_addr "c00102030400c00405060801"

NOTE: the preceding 0x that typically indicates a Hex number is NOT part of the string passed.

[Jesse Delk]

I ran netstat -an here's part of the resilt I believe we are looking for. How do I get the hex value out of this?

tcp 0 1 10.1.31.100.789 172.16.121.14.2049 SYN_SENT

[Jesse Delk]

I may have figured out the hex thing. But I did not know if the letters were upper or lower case. I get the error below.


# ndd -set /dev/tcp tcp_discon_by_addr "0A011F640315AC10790E0801"
operation failed, Invalid argument

# ndd -set /dev/tcp tcp_discon_by_addr "0a011f640315ac10790e0801"
operation failed, Invalid argument

[Radovan Rovny]

Hi
Try to run Simon's procedure on connections in CLOSE_WAIT state and not only on 2049 connections.
Also check if it is possible to close the connections by executing following command:

ndd -get /dev/tcp ?|grep tcp_discon_by_addr