Need to configure iscsi target

[Kaps_2]

Hello,

Recently we have procured ISCSI product and we would like to present the volume from this to the HP-UX server.R the iscsi utilities installed by default in HP-UX or do we need to install it. If so can anybody point me with the required depot and the configurations steps for the same.

Thanks,
Kaps

[Michal Kapalka (mikap)]

hi,

you can download it from HP:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1452A

http://www.docs.hp.com/en/netcom.html#iSCSI%20%28SCSI%20Over%20TCP/IP%29

mikap

[Kaps_2]

thanks for the quick reply, I have already downloaded the depot from the mentioned location however in the installation instructions it states that the server needs a reboot after the installation of the depot as its a kernel settings. However why we need to reboot the server for this, we have mapped the luns to Linux,AIX & Solaris and we have not rebooted a single server for this activity. Whats the pointing of rebooting a server for providing extra space. Is there any way were we can avoid the reboot?

[Michal Kapalka (mikap)]

hi,

if you install somethings that change the kernel, the reboot is required.


mikap