System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Need to find out Core/processor per core/processor on Hpux rp4440 server. How ?

SOLVED
Go to solution
Sammy_2
Super Advisor

Need to find out Core/processor per core/processor on Hpux rp4440 server. How ?

 

Processor Model

 

 

 

Processor Speed MHz Processors Cores Processors per core Hyperthreading enabled

Mgmt is asking me to provide above information on hpux rp4440. Attaching system properties jpg from SAM. How do I get above information via cstm(  Command line )or via SAM ?

Please help.

 

Thanks

good judgement comes from experience and experience comes from bad judgement.
2 REPLIES
Patrick Wallek
Honored Contributor

Re: Need to find out Core/processor per core/processor on Hpux rp4440 server. How ?

All PA8800 CPUs were dual core.  So you more than likely have 2 dual core CPUs for a total of 4 processor cores.

 

Processor Speed = 1 GHz

Processor Cores = 4 cores total

Processors per core -- should be cores per physical processor? = 2

Hyperthreading enabled = NO -- As far as I know hyperthreading is not supported on PA-RISC. 

Sammy_2
Super Advisor
Solution

Re: Need to find out Core/processor per core/processor on Hpux rp4440 server. How ?

Thank You sir. That was very helpful. I could not find info. anywhere what you gave me

 

Appreciate it.

good judgement comes from experience and experience comes from bad judgement.