Operating System - Linux
1748066 Members
5202 Online
108758 Solutions
New Discussion юеВ

Re: New Installation Red Hat

 
Brian M Welch
Frequent Advisor

Re: New Installation Red Hat

We are running Red Hat Enterprise Linux ver. 4.5 using a 64 bit SMP kernel. [2.6.9-55.0.0.2.EL SMP] As Dave mentioned before, there's 4 ProLiant DL380R05 boxes in the cluster. The interconnect switch is a HP Procurve. We are using Qlogic HBA's which plug directly into the SAN Brocade.

Additionally, the Oracle version is 10.2.0.3.
Robert_Boyd
Respected Contributor

Re: New Installation Red Hat

Are you running the HP System Management tools on the members of the cluster? Is ASR enabled? There is a known problem that won't be fixed until SmartStart 8.0 is available. Check and see if you're getting anything in your ILO logs on any of these servers.

There is another article available that discusses this problem.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1201035290165+28353475&threadId=1135440

Robert
Master you were right about 1 thing -- the negotiations were SHORT!
Brian M Welch
Frequent Advisor

Re: New Installation Red Hat

Robert,

Thanks for your reply. We've looked in the ILO logs, and /var/log/messages, and haven't seen anything that would indicate that we are having issues with ASM.