There is no manual. There is a simple README file and since it is a script, you can look at the options. Nickel was created in spare time and is not supported by HP. The output of Nickel is a tar file with dozens of HTML and data files which you would load into a web server directory structure.
running nickel.sh script is very straight forward, No impact running nickel script, its just used to collect information.
Things to take note:- please check if you enough free space on to your current file system inorder to cater the nickel.output files. (usually they throw to /tmp)
step 1:-
ftp the nickel script to /tmp folder
# cd /tmp # ls -l nickel* -> to check/verify copied nickel.sh # ./nickel.sh
HTH,
Johnson
Problems are common to all, but attitude makes the difference
