Operating System - HP-UX
1748211 Members
4933 Online
108759 Solutions
New Discussion юеВ

Not detecting Exchanger for MSL 6030

 
Noble Sebastian
Frequent Advisor

Not detecting Exchanger for MSL 6030

Hi Friends,

I am facing problem not detecting Exchanger (Robotic Arm) my hp ux server

my 11.23 HP UX BOX Connected to SAN .
MSL 6030 Liberary also conneted SAN

IN HP UX , i getting TAPE , but autoch not detecting .

any one can help me

Thanks advance
Regards
Noble

3 REPLIES 3
john123
Trusted Contributor

Re: Not detecting Exchanger for MSL 6030

Hi Noble,
Please confirm the schgr driver module is available to kernal by using kcmodule
try to create the device files using insf.The device file will come under /dev/rac
create a soft link of the device file to /dev/picker
Check robotic arm usiong
mc -p /dev/picker -q

Hope this help u

John

Rita C Workman
Honored Contributor

Re: Not detecting Exchanger for MSL 6030

Just some thoughts,

Did you zone your new library?
Did you load the schgr driver?

Did you run ioscan -fn > ioscan.all? Without the -C tape option and check the output?

Rgrds,
Rita
Noble Sebastian
Frequent Advisor

Re: Not detecting Exchanger for MSL 6030

Thanks ...

I already enabled schgr in kernal ,
details below

name schgr
desc SCSI Medium Changer Device Driver
version [47CD3E4C]
state static
cause explicit
capable static unused
depend module sctl:0.0.0
depend interface HPUX_11_23:1.0

ioscan -funC tape
Class I H/W Path Driver S/W State H/W Type Description
======================================================================
tape 2 0/9/0/0.1.9.255.0.0.0 stape CLAIMED DEVICE HP Ultrium 2-SCSI
/dev/rmt/2m /dev/rmt/2mn /dev/rmt/c18t0d0BEST /dev/rmt/c18t0d0BESTn
/dev/rmt/2mb /dev/rmt/2mnb /dev/rmt/c18t0d0BESTb /dev/rmt/c18t0d0BESTnb


i attached total ioscan out put


Regards
Noble Sebastian