Operating System - HP-UX
1748239 Members
3730 Online
108759 Solutions
New Discussion юеВ

Num pad on keyboard is not working

 
SOLVED
Go to solution
Sachin Patel
Honored Contributor

Num pad on keyboard is not working

Hi
I have B132 workstation. The numpad, insert and delete keys are not working. I try using different keyboards. I even installed new os 11.00 on it. I also play little bit with stty parameter nothing works. Anyone has any idea why?

Thanks
Sachin
Is photography a hobby or another way to spend $
3 REPLIES 3
Kofi ARTHIABAH
Honored Contributor

Re: Num pad on keyboard is not working

Have you tried doing a reset of the terminal?

Hold down the D key, power off the terminal and power it backup (keep holding down the D key for two seconds and release)
-press enter...

Good luck
nothing wrong with me that a few lines of code cannot fix!
Andy Monks
Honored Contributor
Solution

Re: Num pad on keyboard is not working

Assuming your talking about the console, try this :-

rm /etc/kbdlang

and then reboot.

At bootup it will prompt you for your keyboard type. Select the right one and it should all then work.

Re: Num pad on keyboard is not working

Hi !

On the console (without X11), run "itemap -i -L" and choose the correct keyboard !