Operating System - HP-UX
1745923 Members
4194 Online
108723 Solutions
New Discussion

OA don't show the SAN disk path

 
ashraf_islam
Advisor

OA don't show the SAN disk path

I want to install hp-UX VSOE on SAN disk in superdome-2.   So for this,  at first  I assign  a SAN disk by mapping to that server(nPar). Then I connect DVD for OS  by Monarch OA CLI.   And then try to install OS but after some process done, it don't shows  any disk at disk option.  I think, here I have some mistake.

At this regards, how can I  find the SAN disk in OA cli  or how I can show the SAN disk path using command at OA CLI.

Your better suggestion is needed

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: OA don't show the SAN disk path

You can't show it in OA CLI. OA has no clue about this.

 

You should be able to see the disk (LUN) in the installer summary screen. If not, check oning and storage presentation.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ashraf_islam
Advisor

Re: OA don't show the SAN disk path

ashraf_islam
Advisor

Re: OA don't show the SAN disk path

can anyone give more solution? I have faced this problem at customer end.

Torsten.
Acclaimed Contributor

Re: OA don't show the SAN disk path

Boot the server into the installer screen. Then you should see the WWN in MSA host section and you can map a LUN.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!