cancel
Showing results for 
Search instead for 
Did you mean: 

OS baseline backup

Fenglin
Regular Advisor

OS baseline backup

Hi

I want to do a make_tape_recovery for the HP-UX server. I did a 'ioscan -fnC tape'. I can see the status claimed. However it does not show which /dev/rmt/xmn (where x is the number that indicates) belongs to the tape.

My make_tape_recovery command is as follows :
make_tape_recovery -v -x inc_entire=vg00 -a /dev/rmt/xmn


Please advice.

Regards
Feng Lin
3 REPLIES
AnthonySN
Respected Contributor

Re: OS baseline backup

did you do and insf -e after ioscan,
it will create the device files
Fenglin
Regular Advisor

Re: OS baseline backup

Hi

Thank you very much. It works.

Regards
Feng Lin
Mobeen_1
Esteemed Contributor

Re: OS baseline backup

Fenglin,
I see from your response that you have the issue resolved/solution provided. It is a good practise to assign points and close this.

Thanks
Mobeen