System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Operator initiated halt problem On DS15

Ali.nazarof
Occasional Visitor

Operator initiated halt problem On DS15

Dear all
My DS15 alphaserver is halting almost every day with messages like this.

halted CPU 0
halt code = 1
operator initiated halt
pc = fffffe00004cbee8
>>>

If I type "boot" it boot without any problem

Regards,
Ali
2 REPLIES
Kapil Jha
Honored Contributor

Re: Operator initiated halt problem On DS15

raise a hardware case and send binary.errlog file to HP.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Pieter 't Hart
Honored Contributor

Re: Operator initiated halt problem On DS15

"operator initiated halt" indicates that either the front halt button was pressed
or on the console an halt sequence was pressed.

Do you use a serial console or graphics?

On openvms i think it was ctrl-P or break (F5 on a VT-terminal or VT-emulator), can't recall the tru64 variant, but see if i can find it.

have you connected a modem to the aux port?