PAX: Not such device or address

[Jesus_51]

Hi,

I have a new MSL4048 G3 with two drives LTO5 FC connected to SAN. I have the zonning with my server, HP rx6600.

If I execute ioscan command I see hw address correctly. I can load and unload tapes to drives.

The problem is when I execute pax command for example, and I try to write in tape loaded.

I obtain the error:

No such device or address.

Thanks,

Jesus

[Torsten.]

Could you please post the iosscan and your command line?


If there is no tape in drive, you get exactly this message (write to the wrong drive?).

[Jesus_51]

# ioscan -funNC tape
Class     I  H/W Path  Driver S/W State   H/W Type     Description
===================================================================
tape      5  64000/0xfa00/0x18  estape   CLAIMED     DEVICE       HP      Ultrium 5-SCSI
                      /dev/rtape/tape5_BEST    /dev/rtape/tape5_BESTb   /dev/rtape/tape5_BESTn   /dev/rtape/tape5_BESTnb
tape      6  64000/0xfa00/0x1c  estape   CLAIMED     DEVICE       HP      Ultrium 5-SCSI
                      /dev/rtape/tape6_BEST    /dev/rtape/tape6_BESTb   /dev/rtape/tape6_BESTn   /dev/rtape/tape6_BESTnb
# ioscan -funNC autoch
Class     I  H/W Path  Driver S/W State   H/W Type     Description
===================================================================
autoch    4  64000/0xfa00/0x1d  eschgr   CLAIMED     DEVICE       HP      MSL G3 Series
                      /dev/rchgr/autoch4

Thanks

[Torsten.]

And how about your command?

Sure you used the correct tape device?

[Jesus_51]

The command that I use is:

# pax -v -x pax -w -f /dev/rtape/tape5_BESTnb

Thanks

[Jesus_51]

I have to insert two cartridges in the two drives.

In a one drive (/dev/rtape/tape5_BESTnb) I obtain this error:

pax: /dev/rtape/tape5_BESTnb No such device or address

and If I execute the command in the other drive (/dev/rtape/tape6_BESTnb) I obtain:

pax: /dev/rtape/tape6_BESTnb I/O error

Thanks

[Jesus_51]

Hi,

I done a test, I have configurated this with DP on Windows 2003. It works fine.

The problem is in HPUX box.

I obtain the error

cannot open device i/o error

Thanks

[Jesus_51]

I can to load and unload tape from drives but I can not to wite with him.

Any idea, could you help me ¿?

Thks.

[Jesus_51]

Its work fine.

The problem is driver version estape.

Thanks,
Jesus