HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

PRINT_MANIFEST not working

 
Arun Jain
Frequent Advisor

PRINT_MANIFEST not working

Hi All,

I have a rp8420 server running HPUX FOE B.11.23.

When I run "print_manifest" command to collect system information, the command truncates giving following error.

ERROR: Can not read template file: /var/opt/ignite/local/manifest/template.def
Now aborting...

Please suggest:

Thanks & Regards:
Arun Jain
speak less say more
7 REPLIES
Johnson Punniyalingam
Honored Contributor

Re: PRINT_MANIFEST not working

Hi,

Are you root user..?

Can you post the File permission .?

# ll -l /var/opt/ignite/local/manifest/template.def

Thanks,
Johnson
Problems are common to all, but attitude makes the difference
Arun Jain
Frequent Advisor

Re: PRINT_MANIFEST not working

Hi johnson,

It is showing the below message.

/var/opt/ignite/local/manifest/template.def not found

Regards :
Arun Jain
speak less say more
sujit kumar singh
Honored Contributor

Re: PRINT_MANIFEST not working

hi Arun,


could you please see what is the Ignite Version and that the Ignite-UX is installed OK? Try reinstalling the Ignite-UX same version.

#swlist -l product -l bundle | grep -i ignite

regards
sujit
Arun Jain
Frequent Advisor

Re: PRINT_MANIFEST not working

Hi Sujit,

This is ignite version.

#swlist -l product -l bundle | grep -i ignite
# B5725AA C.6.7.79 HP-UX Installation Utilities (Ignite-UX)
B5725AA.Ignite-UX C.6.7.79 HP-UX System Installation Services

Regards:
Arun
speak less say more
Bill Hassell
Honored Contributor

Re: PRINT_MANIFEST not working

> C.6.7.79

This is a very old version. Download the current version from software.hp.com. The current version is C.7.7.98. Ignite/UX is constantly updated to support new hardware. The effort required to recover the missing file (or files) is not worth the effort. Ignite/UX can be installed on top of an older copy and will not require a reboot.


Bill Hassell, sysadmin
sujit kumar singh
Honored Contributor

Re: PRINT_MANIFEST not working

hi


print_manifest shall read and report data well once the Ignite Config is proper and ignite base bundle is installed.

If the Ignite Bundle Is properly installed then you will in all certainty will get the print_manifest to work.

so can see by installing the Igite bundl again.

regards
sujit
Javed Khan_1
Valued Contributor

Re: PRINT_MANIFEST not working

Hi,

If this system is not an ignite server why to install ignite complete depot for client you only need IUX-Recovery

This can be easily installed by script add_new_client -s ignite server ip address

This script is available in /opt/ignite/bin on ignite server.

remember to remove all old ignite software beforw you install IUX-Recovery


Javed
Never Give Up