Patch download

[oprakash]

Hi,

Can any one suggest how to download hp patches.
I have received one line like below to install patch.

HPSBUX02366 SSRT080120 rev.2 - HPUX Running useradd(1M), Local Unauthorized Access (Updated).

I am using HP 11.00 & 11.11 operating system version

[Ganesan R]

Hi Oprakash,

Get the patch number (Ex:PHNE_23456 or 23456) which you want to install.

You can download all HP-UX patches here.

http://www11.itrc.hp.com/service/patch/mainPage.do?admit=109447626+1243248865342+28353475

You won't get patches for 11.0 since HP already discontinued the support for 11.0

[R.K. #]

Hi OPrakash,

>>I have received one line like below to install patch.
HPSBUX02366 SSRT080120 rev.2 - HPUX Running useradd(1M), Local Unauthorized Access (Updated).

Check the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01539431

For 11.11: PHCO_38492
http://www13.itrc.hp.com/service/patch/mainPage.do

Enter the patch name above to download it.

And as Ganeshan said you may not find patches for 11.00.

Regds,
R.K.

[johnsonpk]

Hi Oprakash,

The ID links to the most recent HP security Bulletin .Check the below link

http://www11.itrc.hp.com/service/cki/docDisplay.do?docId=emr_na-c01539431-2

The The security pacth applicable for 11iv1 through V3 and not for 11.00
Since You have 11v1 ,download and install the patch
PHCO_38492 or subsequent from the below link


Hope this helps ..
Thanks!!
Johnson

[oprakash]

Hi,

Thanks for your information, i can able to download it, but how can i check whether reboot is required or not

[R.K. #]

Hello Oprakash,

When you open the patch on itrc site mentioned above, you can see some symbols. In this case reboot symbol is not present.
So a reboot is not required.

Regds,
R.K.

[Sajjad Sahir]

Dear oprakash

kernal patches always u need reboot, other pathches it will mention what are the related things in itrc , once u downloaded patches u can install patches by using swinstall -s command.
if u want to know any thing more please
revert back

thanks and regards

Sajjad Sahir

[Dennis Handly]

>how can I check whether reboot is required or not

You can tell from the URL:
http://www.itrc.hp.com/service/patch/patchDetail.do?patchid=PHCO_38492#Automatic%20Reboot?:

Or you can list the patch:
swlist -l fileset -a is_reboot -s $PWD/patch

[James R. Ferguson · Accepted solution]

Hi:

HP-UX patches are named prefixed with 'PHCO_' for patches to 'CO'mmands'; 'PHKL_' for KerneL patches; 'PHNE_' for 'NE'tworking patches; and 'PHSS_' for patches to various SubSysstems (e.g. compilers, etc).

As a general guideline, PHKL_ and PHNE_ patches will require a reboot to install; PHCO_ and PHSS_ will not.

Regards!

...JRF...

[Bob E Campbell]

Try using Software Assistant (https://www.hp.com/go/swa). It can identify whether or not the security bulletin is currently an issue:

# swa report -a SEC -r issue

and then build you an install-ready depot:

# swa get -t /my/depot/here