Pbs embeded raid controler - proliant DL320 G4

[Thierry Godin]

Hi everybody,

I've tried to install the driver for the embeded raid controler (on Proliant DL320 G4)

======================
Os : RHEL4 U4
Kernel : 2.6.9-42.EL
PSP 7.60
2x SATA 80Go
RAID1
======================

The array is configured and enabled in BIOS.
The logical volume is recognised at startup.


So I've downloaded adpahci package (adpahci-1.2.5571-1.rhel4.i686.rpm) installed it ant after reboot the server freeze + black screen

The last post is "sda : asking for cache data failed"

Has somebody an idea ?

Thank You

[Steven E. Protter]

Shalom,

Reinstall the OS, its trashed. Don't install the drive for the embedded raid controller. The one that ships with the system works quite well. I've got a number of such systems with DSL320 G4 in production. My ftp cluser runs on one, works very nicely without any change in drivers.

Call this adventure, a driver too far.

Its not a bad idea to isntall PSP 7.60 as you've done, it has some very nice feature. Beyond that, do the OS and make the system humm.

SEP

[Thierry Godin]

Hi ,

Thank's for reply.

I've made a new full install of RHEL4 U4
but RHEL4 sees 2 sata HDD and not the volume array.

So I made manual partitionning and use only the first HDD (sda) .

That works . I've installed PSP 7.60 again.

Now , how do I verify that the raid 1 works ?

It seems that 2nd HDD (sdb) is empty.
Does it not beeing a clone of sda ??

(Hope you'll understand my bad english ...)

[Vitaly Karasik_1]

did you receive any messages during RPM install?
adpahci-1.2.5571-1.rhel4 should support RHEL4 upd4.

[Thierry Godin]

For Vitaly :

Hi, and thank you for response.

No I had no message during RPM installation.

Anyway, I made an installation (as said above) and without the driver.

When I open the Hardware Browser in RHEL4, the intel SATA driver is well recognized. So thats seems good.

Now, I just want to know how to check the RAID 1 is working (or configure).
The second Hdd (sdb) is ever empty.

[Vitaly Karasik_1]

As far as I understand, you already configured RAID 1 via raid "BIOS".
The fact that your linux sees two harddisks instead of 1 (== RAID 1) says that your linux doesn't understand that there is RAID controller.
So we need to install adpahci in order to use this "hardware" RAID.
The other option is create mirror using linux software RAID.

[Alpha977]

Any message into the logs too? (/var/logs...)

[Thierry Godin]

Alpha977 :
There is no message about that in /var/logs
(I've made a new install without the driver)

Vitaly :
That's what I had understood first . I need to install adpahci in order to RAID1 works .

I try again and post here asap.
(I found the floppy driver on Hp web.)

Thank's

[Thierry Godin]

Now I've downloaded the software driver :

adpahci-1.2.5571-1.rhel4.i686.dd.gz

I made a diskette using Rawrite .
Then I reboot the server with RHEL4 CD1 and enter "linux updates dd" at prompt.

Then It ask me to load the diskette and press ENTER but It cannot load the driver.

The message is : Failed to mount updates disk.

I use a USB Floppy.

[Vitaly Karasik_1]

are you able to read files on floppy using other linux?