Pbs embeded raid controler - proliant DL320 G4

[Thierry Godin]

Yes , it works on MDK 10.0 and Suse 10

[Mike Stroyan]

The RHEL4 installer may not be able to use the particular USB floppy device or may need to have "legacy USB" support enabled in the BIOS to be able to use it during installation. There is some discussion of USB installation device issues at
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
(although it doesn't get into any details on specific linux releases such as RHEL4). If the particular floppy drive is a source of trouble then you may have more success with a USB flash drive.

[Thierry Godin]

Finally,

I've loaded the driver with the USB floppy.
(I made wrong manipulations before ....)

Now RHEL4 see only one drive labelled RAID-1

I make a complete installation.
It will be easy now.

Anyway,
Thanks a lot everybody for your useful help !

[Thierry Godin]

Okay,
All works fine now .
The OS is installed, RAID-1 works too.

Thank you for your help.

Best regards
Thierry Godin

[Kal lim]

Hi Thierry,

Can you post me the fix please? I have DL320 G5 and have created a floppy disketter from HP Embedded SATA RAID Controller Driver Diskette for Red Hat Enterprise Linux 4 (x86). However when using the disk I try to load the drive I get:
Failed to mount driver disk.
How did you get round the problem?