System Administration
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem during booting up HP-UX

FaizirizaL
Frequent Advisor

Problem during booting up HP-UX


Hi there,

I need some advice here on how to avoid the following:

Recreating and recovering qlog devices

vxfs qlogrec : Problem reading file /etc /qlog /config.lock : Error 0
vxfs qlogck : Problem reading file /etc /qlog /config.lock : Error 0
vxfs qlogck : Command qlogck was not successful
vxfs qlogck : The command qlogck

vxfs qlogck : Running the command qlogck with the –f option
vxfs qlogck : will fix most of the problem(s) but will force
vxfs qlogck : a full consistency check (full fsck)
vxfs qlogck : on the vxfs volume(s) which cannot be fixed.

The QuickLog routine ‘qlogck’ encountered the errors mentioned above.
Dropping into a shell so that you can attempt to correct these problems. Once
all possible correction have been made, enter Control – d to exit the shell, and
initialization will resume, see qlogck (1M) for assistance.



This happens during OS boot up. For the current practice, i need to cntl + d to proceed OS boot up.

Thanks in advance.
2 REPLIES
Analyst
Trusted Contributor

Re: Problem during booting up HP-UX

Hi FaizirizaL,

This is related to Veritas.
This qlogck with -f option will force a full consistency check (full fsck).

Also Check the following
/etc/fs/vxfs/qlogattach
/etc/fs/vxfs/qlogck
/etc/fs/vxfs/qlogrec
/etc/init.d/qlog-startup
/etc/rcS.d/S88qlog-startup

goahead with the check.

Thanks,
Analsyt.
Johnson Punniyalingam
Honored Contributor

Re: Problem during booting up HP-UX

Hi Faizizal,

You need patch your server,

what HPUX OS version are you running ..?

what version for veritas Volume Manager..?

You hit this error boecoz of your inconsistence File system check when server boots up

Thx,
Johnson

Problems are common to all, but attitude makes the difference