BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

Problems with APA

Super Advisor

Problems with APA


I have reboot one server that has APA configured.
When I up the lan900 interface it shows me:

#/sbin/init.d/hplm start
/sbin/init.d/hplm started.
Reading ASCII file /etc/lanmon/lanconfig.ascii
ERROR: Ports 2 and 5 can not be aggregated in one failover group, they are not compatible
Creating Fail-Over Group lan901
Creating Fail-Over Group lan902
Updated binary file /etc/lanmon/lanconfig
/sbin/init.d/hplm Completed successfully.

And the server only ups the lan5.
I have look the interface and they are configured with:

#lanadmin -x 2
Speed = 1000 Full-Duplex.
Autonegotiation = On.

#lanadmin -x 5
Speed = 100 Full-Duplex.
Autonegotiation = On.

Could it be the problem?

Thanks a lot of!
Users are not too bad ;-)
Esteemed Contributor

Re: Problems with APA


speed are different

lan 2 speed=1000 full duplex
lan5 speed =100

Autonegociation=on , switch to off and force speed twice cards at 100

Super Advisor

Re: Problems with APA

Users are not too bad ;-)