Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems with APA

Carme Torca
Super Advisor

Problems with APA

Hi,

I have reboot one server that has APA configured.
When I up the lan900 interface it shows me:

#/sbin/init.d/hplm start
/sbin/init.d/hplm started.
Reading ASCII file /etc/lanmon/lanconfig.ascii
ERROR: Ports 2 and 5 can not be aggregated in one failover group, they are not compatible
Creating Fail-Over Group lan901
Creating Fail-Over Group lan902
Updated binary file /etc/lanmon/lanconfig
/sbin/init.d/hplm Completed successfully.


And the server only ups the lan5.
I have look the interface and they are configured with:

#lanadmin -x 2
Speed = 1000 Full-Duplex.
Autonegotiation = On.

#lanadmin -x 5
Speed = 100 Full-Duplex.
Autonegotiation = On.


Could it be the problem?

Thanks a lot of!
Carmen.
Users are not too bad ;-)
2 REPLIES
Ludovic Derlyn
Esteemed Contributor

Re: Problems with APA

Hi

speed are different

lan 2 speed=1000 full duplex
lan5 speed =100

Autonegociation=on , switch to off and force speed twice cards at 100

regards
Highlighted
Carme Torca
Super Advisor

Re: Problems with APA

-
Users are not too bad ;-)