cancel
Showing results for 
Search instead for 
Did you mean: 

QPK installation

 
fizan
Super Advisor

QPK installation

QPKBASE
vendor
tag HP
uuid
title "Hewlett-Packard Company"
description "Software Patches from Hewlett-Packard"
end
bundle
tag QPKBASE
software_spec QPKBASE,r=B.11.31.0809.326,a=HP-UX_B.11.31_IA/PA,v=HP
data_model_revision 2.40
instance_id 1
control_directory QPKBASE
size 140798905
revision B.11.31.0809.326
title Base Quality Pack Bundle for HP-UX 11i v3, September 2008

this the version of qpk

1,while installing the OS it will be autmatically QPK will be installed or we want to download from itrc and then install it again.
2 REPLIES
Torsten.
Acclaimed Contributor

Re: QPK installation

Let's say you install a 2008 version of 11.31 - the patch bundles (included on the media) will be installed too.

But you are not up to date in this case.

You should download and install the current and latest bundle.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
James R. Ferguson
Acclaimed Contributor

Re: QPK installation

Hi:

> while installing the OS it will be autmatically QPK will be installed or we want to download from itrc and then install it again.

Is this based on your earlier thread, here?:

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1390881

If so, see the responses there. If not, and you are asking if a cold-install using 11.31 media gives you the QPK from September 2008 and should you refresh this, then, "yes" you might want to complete your installation with a download and install of the latest (September 2009) bundle.

Regards!

...JRF...